Year 2022-23
S.N | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | Sanjaykumar Gawade, Sumit v Patil Laxman Y. Waghmode, | Effect of low-cost automation on labor productivity and labor fatigue for corrugated boxes flaps twisting |
IOS Press | 73 | 1 | 143-155 | 2022-23 | 53 | ISSN -10519815, 18759270 | ||
2. | Sanjaykumar Gawade, Amol B. Chavan |
A review on surface coating techniques on Mg based bio-degradable implants |
Materials today: Proceedings | 72 | 3 | 1361-1366 | 2022-23 | 56 | 2.52 | ISSN -22147853 | |
3. | Pratik A. Patil, Sachin K. Patil | Assessment of surface integrity and hole quality in graphene-based NMQL Micro-drilling of ceramic-coated Nimonic 90 for gas turbine applications | Engineering Research Express of IOP publisher | 5 | 1 | 1-21 | 2022-23 | 9 | 1.205 | Doi.org/10.1088/2631-8695/acb9ff | |
4. | Sachin N.Sawant, Sachin K. Patil | Effect of copper, tungsten copper and tungsten carbide tools on micro-electric discharge drilling of Ti-6Al-4V alloy | Journal of Materials Research and Technology | 24 | 1 | 4242-4257 | 2022-23 | 77 | 6.267 | doi.org/10.1016/j.jmrt.2023.04.067 | |
5. | Sachin K. Patil, Swapnil Lahane, | Circular supply chain implementation performance measurement framework: A comparative case analysis | Production Planning & Control | 258 | - | 120859-12870 | 2022-23 | 92 | 6.441 |
ISSN 09537287, 13665871 doi.org/10.1080/09537287.2023.2180684 |
|
6. | Ganesh Suryawanshi, Sachin K. Patil, R. G. Desavale | Empirical-based DA and ANN to diagnose misalignment in rotor-bearing system | Nondestructive Testing and Evaluation | 39 | 02 | 1-27 | 2022-23 | 35 | 2.98 | doi.org/10.1080/10589759.2023.2228979 | |
7. | Vishal G. Salunkhe, R. G. Desavale,Suraj Kumbhar | Vibration Analysis of deep groove ball bearing using finite element analysis and dimension analysis | Journal of Tribology | 144 | 1 | 081202-1-081202-12 | 2022-23 | 95 | 2.5 | DOI 10.1115/1.4053262 | |
8. | R. G. Desavale, Sushant M. Patil, R.R.Malagi, | Fault identification in a nonlinear rotating system using dimensional analysis (DA)and center composite rotatable design (CCRD) | Measurement | 200 | 1 | 1-11 | 2022-23 | 115 | 5.6 | ISSN -0263-2241 | |
9. | R. G. Desavale, Pratiksha S.Salunkhe, Sumit A Shinde | A novel method to classify rolling element bearing faults using k-nearest neighbor machine learning algorithm | Journal of risk and uncertainty in engineering system Part :Mechanical engineering | 8 | 1 | 031202-1-031202-13 | 2022-23 | 17 | 2.2 | DOI 10.1115/1.4053760 | |
10. | Mahadev B. Kumbhar Surajkumar G. Kumbhar, R. G. Desavale | Dynamin characterization of MR Fluid-based dynamic vibration | Arabian journal for science and engineering | 48 | 1 | 1-15 | 2022-23 | 60 | 2.9 | DOI 10.1007/s13369-022-07410-3 | |
11. | R. G. Desavale, Prasad Shinde, P.M.Jadhav | A multi-fault classification in a rotor-bearing system using a machine learning approach | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 45 | 2 | 121-134 | 2022-23 | 51 | 2.2 | DOI 10.1007/s40430-023-04015-1 |
|
12. | Vishal G. Salunkhe, R. G. Desavale,S.M.Khot | A novel incipient fault detection technique for roller bearing using deep independent component analysis and variation model decomposition | Journal of Tribology | 145 | 1 | 074301-1--074301-15 | 2022-23 | 95 | 2.5 | DOI 10.1115/1.4053262 | |
13. | Khalkar, V., Pratik, O.A.K., moshi, A., hariharasakhtisudhan, P., Jugulkar, L. and Raman | Crack Detection in A Cantilever Beam Using Correlation Model and Machine Learning Approach | Romanian Journal of Acoustics and Vibration | 19 | 2 | 121-133 | 2022-23 | 11 | 0.39 | ISSN -15847284 | |
14. | Kumbhar, S.G., Logesh, K., Hariharasakhtisudhan, P., Jadhav, S.D., Danawade, B.A., Gharat, S.H., Jugulkar, L.M. and Borade | Experimental and Numerical Investigation of a Cracked Cantilever Beam for Damping Factor to Access its Applicability in the Crack Detection | U. Porto Journal of Engineering | 8 | 2 | 169-196 | 2022-23 | 4 | 0.357 | ISSN -21836493 | |
15. | Abhijeet P Shah | Design and development of automotive radiator for better cooling efficiency | Materials today: Proceedings, | 72 | 3 | 1028-1034 | 2022-23 | 56 | 2.52 | ISSN -22147853 | |
16. | Abhijeet Shah, Shrikant Shetgar, Nagaraj Dharwadkar | Assigning the test case priorities using butterfly optimization algorithm for software test | International Journal of software Innovation | 10 | 1 | 1-12 | 2022-23 | 9 | 1.34 | DOI: 10.4018/IJSI.303577 | |
17. | Maruti Mandale, Avinash V. Borgaonkar | Experimental and finite element investigation of statistic energy analysis parameters for idealized subsystem | Materials today: Proceeding | 77 | 3 | 680-686 | 2022-23 | 69 | 2.52 | ISSN -22147853 | |
18. | Maruti Mandale, Avadhut Patil | Experimental analysis of energy conversion and noise suppression mechanism using polyvinylidene difluoride piezoelectric element | Noise and vibration worldwide | 53 | 9 | 1-10 | 2022-23 | 16 | 1.29 |
ISSN-09574565 |
|
19. | Rajendra Pawar, Maruti Mandale | Recent advancements in synthesis, rheological characterization, and tribological performance of vegetable oil-based lubricants enhanced with nanoparticles for sustainable lubrication | Journal of Cleaner Production | 378 | 1 | 134454 | 2022-23 | 232 | 10.956 | ISSN -134454 | |
20. | Rajendra Pawar, Sharad Patil | Investigating the Effect of Compression Ratio on Operating Characteristics of Compression Ignition Engine Fueled with Diesel—Ricebran Biodiesel—n‑Butanol Additive Blends |
Journal of The Institution of Engineers (India): Series E |
104 | 1 | 129-140 | 2022-23 | 11 | 1.11 | doi.org/10.1007/s40034-022-00264-2 | |
21. | Sharad D Patil | Performance analysis of sodium alanate hydride reactor with different nanofluids | International Journal of Hydrogen Energy | 48 | - | 19486-97 | 2022-23 | 231 | 7.139 | doi: 10.1016/j-ijhyden.2023.02.105 | |
22. | Santosh R Patil | Design and Simulation of Automotive Radar for Autonomous Vehicles | EUREKA Physics and Engineering | 3 | 1 | 56-65 | 2022-23 | 10 | DOI :10.21303/2461-4262.2023.002766 | ||
23. | R.V. Pawar | Performance Testing of Multicylinder Compressed Ignition Engine with Dual Fuel Mode of CNG with Biodiesel and Diesel |
International Journal of Vehicle Structures and Systems |
14 | 6 | 703-710 | 2022-23 | 48 | 0.528 | doi: 10.4273/ijvss.14.6.02 | |
24. | B.R.Jadhav, Sanket S. Sawant | Need of hybrid electric two wheelers on Indian roads to sustain green environment | International Journal of Mechanical and Production Engineering Research and Development | 12 | 6 | 1-8 | 2022-23 | 25 |
ISSN- 2249-6890 |
||
25. | Ranjit Patil, Samir Kumbhar, Santosh B Rane | Investigation of the damping behavior of shape memory alloy-nitinol reinforced composite | Engineering Research Express of IOP publisher | 4 | 4 | 2022-23 | 9 | 1.205 | DOI 10.1088/2631-8695/ac9faa 10.3233/WOR-211065 | ||
26. | Shailesh Shirguppikar, M.V.Pachore, S.N.Hankare | Application Of Neural Network For The Detection Of Covid-19 Or Viral Pneumonia | Journal of Positive School Psychology | 6 | 10 | 782-790 | 2022-23 | 5 | 8 | ISSN -27177564 | |
27. | Shailesh Shirguppikar, Phan Nguyen Huu,Muthuramalingam T. | Multi-objective optimization of micro EDM using ALCrNi- Tungsten carbide electrode for Ti-6AL-4V | International journal of advance manufacturing technology | 47 | 3 | 1-12 | 2022-23 | 52 | 3.77 | ISSN -2562499 | |
28. | Rohit Magdum | Experimental investigation and optimization of AZ31 Mg alloy during warm incremental sheet forming to study fracture and forming behaviour | Coatings | 13 | 1 | 1-16 | 2022-23 | 48 | 3.117 | doi.org/10.3399/coating13010068 | |
29. | Sudhindra N. Jalwadi, Tanmay K. Bhandakkar | Development of Virtual Internal Bond method based material model for Carbon fiber and its application to Carbon fiber reinforced epoxy system | Engineering Fracture Mechanics | 281 | 1 | 1-19 | 2022-23 | 138 | 4.847 | doi.org/10.1016/j.engfracmech.2023.109114 |
Year 2021-22
Publication in H-Index Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | G.L.Suryawanshi,Dr S.K.Patil, ,R. G. Desavale | Dynamic model to predict vibration characteristics of rolling element bearings with inclined surface fault | Journal of international measurement confederation | 184 | 01 | 109879-1-10 | 2021-22 | 91 | 3.364 | https://doi.org/10.1016/j.measurement.2021.109879 | |
2. | R. G. Desavale, P. M. Jadhav, Nagaraj V. Dharwadkar | Dynamic Response Analysis of Gearbox to Improve Fault Detection Using Empirical Mode Decomposition and Artificial Neural Network Techniques | ASME J. Risk Uncertainty Part B | 7 | 3 | 031007-17 | 2020-21 | 13 | ISSN: 2332-9017 | ||
3. | Vishal G. Salunkhe, R. G. Desavale | An Intelligent Prediction for Detecting Bearing Vibration Characteristics Using a Machine Learning Model | Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems | 4 | 3 | 31004 | 2021-22 | 7 | ISSN: 2572-3901 | ||
4. | Vishal G. Salunkhe, R. G. Desavale,T.Jagadeesha | A numerical model for fault diagnosis in deep groove ball bearing using dimension th | Material Today: Proceeding | 47 | 11 | 3077-3081 | 2021-22 | 47 | ISSN:2214-7853 https://doi.org/10.1016/j.matpr.2021.12.196 | ||
5. | Prasad V.Shinde R. G. Desavale, | Application of dimension analysis and soft competitive tool to pre | Measurement | 193 | 1 | 770984-110995 | 2021-22 | 91 | ISSN:2214-7853 https://doi.org/10.1016/j.matpr.2021.12.196 | ||
6. | Surajkumar G. Kumbhar, R. G. Desavale and N. V. Dharwadkar | Fault size diagnosis of rolling element bearing using artificial neural network and dimension theory |
Neural Computing and Applications | 33 | 16079–16093 | 2021-22 | 80 | 5.606 | doi.org/10.1007/s00521-021-06228-8 | ||
7. | R V Pawar, Sharad Patil, Kamalesh Jagadale, Pranali Gujar, Vishal Barade | An Experimental Investigation on Performance, Combustion, Emission and Vibration Analysis of Diesel Engine Fuelled with Rice Bran Biodiesel and n-Butanol Additive | Journal of Engineering Research (JER) | online | - | - | 2021-22 | 12 | 1.449 | - | ISSN: 2307-1877 Print, Online ISSN: 2307-1885 |
8. | Dr. Sharad D. Patil, Randhir Y. Chavan | Analysis of flow & heat transfer enhancement of turmeric cooking steam generator | International Journal of Food Processing and Preservation | - | - | 1-10 | 2021-22 | 48 | 2.127 | ISSN: 01458892, 17454549 DOI: 10.1111/jfpp.16587 | |
9. | Prashant S Jadhav and Chinmaya P Mohanty | Performance assessment of energy efficient and eco-friendly turning of Nimonic C-263: A comparative study on MQL and cryogenic machining | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | Online First | - | 223-249 | 2021-22 | 62 | 2.61 | https://doi.org/10.1177/09544054211061961 | |
10. | Prashant S Jadhav and Chinmaya P Mohanty | Comparative analysis of indirect, direct and hybrid cryogenic machining of Nimonic C-263 super alloy | Journal of Engineering Research (JER) | Online First | - | 1-9 | 2021-22 | 12 | 1.449 | ISSN: 2307-1877 Print, Online ISSN: 2307-1885 | |
11. | Prashant Jadhav, Vaibhav Sidraya Ganachari, Uday Chate, Satish Mullya | Simulation and experimental investigation of tool wear rate in dry and near-dry EDM process | World Journal of Engineering | 18 | 5 | 701-709 | 2021-22 | 9 | - | ISSN:17085284 | |
12. | Prashant S Jadhav,Aanosh Ware | Optimizing the Plant Layout of a Foundry to Increase Productivity by Employing Systematic Layout Planning (SLP) Technique | Design Engineering | 20 | 09 | 3999-4020 | 2021-22 | 7 | ISSN:00119342 | ||
13. | Shailesh Shirguppikar, M S Patil | Assessing the effect of uncoated and coated electrode on response variable in Electrical Discharge Machining for Ti6Al4V | Triobolgy in the Industry | 43 | 4 | 524-534 | 2021-22 | 23 | doi.org/10.24874/ti.1020.12.20.03 | ||
14. | Santosh patil, Shailesh Shirguppikar, Pham Van Dong | Synthesize and characterization of artificial human bone developed by using nanocomposite | EUREKA: Physics and Engineering | 3 | 1 | 112-120 | 2021-22 | 07 | ISSN: 24614254, 24614262 doi.org/10.21303/2461-4262.2022.002432 | ||
15. | Shailesh Shirguppikar, Nguyen Huu Phan, Ngo Ngoc Vu | Multi-criteria decision making in electrical discharge machining with nickel coated aluminum electrode for titanium alloy using preferential selection index | Manufacturing Review | 1 | 1 | 1-10 | 2021-22 | 16 | 1.882 | ISSN-22654224 doi.org/10.1051/mfreview/2022010 | |
16. | Santosh R. Patil, Sanjaykumar Gawade, Shailesh S. Shirguppikar, Nguyen Huu Phan, | Design of ER damper for recoil length minimization: A case study on gun recoil system | Journal of the Mechanical Behavior of Materials | 1 | 1 | 177-185 | 2021-22 | 10 | 2.162 | ISSN:03348938, 21910243 | |
17. | Santosh patil, Shailesh Shirguppikar, Pham Van Dong | E?ect of boron carbide reinforcement on properties of stainless-steel metal matrix composite for nuclear applications | Journal of the Mechanical Behavior of Materials | 1 | 1 | 390-397 | 2021-22 | 10 | 2.162 | ISSN:03348938, 21910243 doi.org/10.1515/jmbm-2022-0047 | |
18. | Kanhaiya Powar, Sharad Patil | Promoting Technology-Enhanced Project-Based Learning through Application of 3D Printing Technology for Mechanical Engineering Education | Journal of Engineering Education Transformation | 35 | Special Issue | 85-96 | 2021-22 | 05 | |||
19. | Ansar Mulla, Abhijeet Shah | Numerical Theory to Practical Working Model Learning Approach | Journal of Engineering Education Transformation | 35 | Special Issue | 69-78 | 05 | ||||
20. | Maruti B Mandale Avadhut T Patil, | Recent acoustic energy harvesting methods and mechanisms: A review | Noise & Vibration Worldwide | 52 | 1 | - | 2021-22 | 11 | doi.org/10.1177/09574565211030702 | ||
21. | Maruti B Mandale Avadhut T Patil, | Generation of electric potential and noise suppression from an integrated system of acoustic energy conversion | Australian of Mechanical Engineering | Online First | - | Online First | 2021-22 | 13 | 1.3 | ISSN-14484846 doi.org/10.1080/14484846.2022.2073018 | |
22. | Fahad M. Kazi C. A. Waghmare M. S. Sohani | Multi-objective optimization of the aluminum powder-mixed EDM process using the GRA and TOPSIS techniques based on the fuzzy AHP approach | Journal of Applied Research and Technolog | 19 | 01 | 437-449 | 2021-22 | 30 | ISSN:16656423 | ||
23. | Fahad M. Kazi C. A. Waghmare M. S. Sohani | Multi- objective optimization of machining parameters in hybrid powder-mixed EDM process by response surface methodology and normalized fuzzy logic algorithm. | International Journal on Interactive Design and Manufacturing | - | 01 | 230-241 | 2021-22 | 24 | ISSN:19552505, 19552513 | ||
24. | AbhishekKeripale and Samir Kumbhar | Analysis of impact energy absorption and dissipation capacity of different composite materials using numerical simulation | Materials Today: Proceedings | 58 | 4 | online | 2021-22 | 47 | ISSN:2214-7853 doi.org/10.1016/j.matpr.2021.12.196 | ||
25. | Prashant V.Gunjavate, Sanjaykumar S Gawade, Sharad D.Patil | Design of Liquid Desiccant Dehumidifier to enhance the Indoor Air Quality | Materials Today: Proceedings | 62 | 12 | 6793-6798 | 2021-22 | 47 | ISSN:2214-7853 | ||
26. | Ranjit Anil Patil ,Santosh Rane,Samir Kumbhar | Static analysis of shape memory alloy (SMA) reinforced composite | Materials Today: Proceedings | 62 | 12 | 6832-6836 | 2021-22 | 47 | ISSN:2214-7853 |
Publication in Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | Mrunal Uttam Patil, M. V. Kavade | Mechanical characterization of E-Glass/Epoxy composite with a filler material as Ceramic Powder | International journal of advance research, ideas and innovation in technology | 7 | 6 | 163 - 166 | 2021-22 | - | -- | -- | ISSN: 2454-132X |
2. | Abhijeet Shah Amey Gaurvadkar | A case study on improvements of placement at rajarambapu institute of technology by various means of coaching and mentoring | National institute of personal management | 1 | 4 | 273-281 | 2021-22 | - | -- | -- | ISSN:0970-8405 |
Publication in Conference Paper
Sr.No. | Authors name | Paper title | Conference Name | International/National | Page nos. If any | Year and month of publication |
1. | Akshay Patil, Samir Kumbhar, Ranjit Patil, | Frequency shift analysis of Shape Memory Alloy reinforced composite plate | International Conference on Innovation Challenges and Advances in Engineering & Technology: A road to selfreliant India |
International | 14-29 | 2021-22 |
2. | Omkar Kumbhar Samir Kumbhar, Ranjit Patil, | Study on damping behavior of SMA reinforced composite with elastomeric core | International Conference on Innovation Challenges and Advances in Engineering & Technology: A road to selfreliant India |
International | 15-28 | 2021-22 |
3. | Randhir Yashwant Chavan, Sharad D. Patil | Analysis of Flow & Heat Transfer Enhancement of Turmeric Cooking Steam Generator | International Virtual Conference on Innovation Challenges and Advances in Engineering & Technology (ICAET-2021) organized by Vishwaniketan's Institute of Management Entrepreneurship and Engineering Technology (ViMEET), Khalapur, from Mumbai University, Maharashtra | International | 1-7 | 2021-22 |
4. | Appasaheb T. Kadam, Sharad D. Patil | Performance Analysis of Argemone Mexicana Biodiesel on VCR Diesel Engine | National Conference on Turbo machines, Energy and Combustion | National | 20-30 | 2021-22 |
5. | Rohit J. Sutar, Sharad D. Patil. | Numerical analysis of heat transfer enhancement in metal hydride hydrogen storage reactor system using bio fluid | National Conference on Turbo machines, Energy and Combustion | National | 62-73 | 2021-22 |
6. | Rahul Urunkar and Sharad Patil | Performance evaluation of multi-tubular sodium alanate hydride reactor by enhancing heat and mass transfer characteristics using nanofluids | 26th National Heat and Mass Transfer Conference and the 4th International ISHMT - ASTFE Heat and Mass Transfer Conference (IHMTC-2021) | International | 1-10 | 2021-22 |
7. | Kanhaiya Powar ,Sharad Patil | Promoting Technology-Enhanced Project-Based Learning through Application of 3D Printing Technology for Mechanical Engineering Education | International Conference on Transformations in Engineering Education (ICTIEE 2022) | International | 292-304 | 2021-22 |
8. | Mandar Page, Kanhaiya Powar, Sharad Pati | Estimation of heat generation rate from 18650 Lithium-Ion Battery at Various Discharge Rates | National Conference in Mechanical Engineering: Advances in Materials and Design (NCMEAMD-2022) | National | 1-8 | 2021-22 |
9. | R. G. Desavale, P.S. Salunkhe,S.V.Patil,S.A.Shinde | Compound Fault Diagnose of rotor Bearing System Using K-NN Machine Learning Approach | International Conference on Advancements in Design and Tribology (ICADT) | International | 21-32 | 2021-22 |
10. | R. G. Desavale, Prasad Shinde | An Investigation of unbalanced in rotor bearing system using matrix method and experimental approach | International Conference on Advancements in Design and Tribology (ICADT) | International | 18-29 | 2021-22 |
11. | R. G. Desavale, V,G Salunkhe | Experimental mathematical model for diagnosis of vibration generation in defective rolling element bearing. | International Conference on Advancements in Design and Tribology (ICADT) | International | 16-27 | 2021-22 |
12. | Abhijeet Shah , Sukanya Patil | Next generation intelligent cold storage system based onIOT | Recent Advanced in engineering and technology | National | 1-10 | 2021-22 |
13. | Abhijeet Shah Amey Gaurvadkar | Design and Development of Automotive Radiator for better cooling efficiency | Proceeding of the international conference & exposition on advances in mechanical engineering | International | 1-10 | 2021-22 |
14. | S Shirguppikar, BT Long, MT Bich, LQ Dung | Experimental Investigation of the Influence of Processes Parameters on Z Coordinate in Micro EDM for Ti-6Al-4V | International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development | International | 507-512 | 2021-22 |
15. | S Shirguppikar, Huu-Phan Nguyen, Tien-Long Banh | Performance Analysis of Copper Coated Aluminum Tool in Electrode Discharge Machining of Ti-6Al-4V Alloy | International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development | International | 520-526 | 2021-22 |
16. | M.B.Mandale,S.S.Powar | Design and Development of a Rotary Torque Sensor | Proceeding of national conference on Recent advance in engineering and technology | National | 294-302 | 2021-22 |
17. | M.B.Mandale,Shreyas Narvekar | Acoustic Matamaterial (AMMS)for Noise Reduction -Review | Proceeding of national conference on Recent advance in engineering and technology | National | 267-278 | 2021-22 |
18. | B.R.Jadhav | Need of Hybrid electric two wheeler :Recent Development and Revolution Requirement on Indian Road | Emerging Trends in Electric-Mobility & Sustainable Development : Opportunities & Challenges | National | 1-10 | 2021-22 |
19. | AjinkyaK. Patil, Pruthviraj C.Chavan | Utilization of nearpod application to improve student participation in online CFD Laboratory course | Ninth International Conference Transformations in Engineering Education (ICTIEE 2022) | International | 320-331 | 2021-22 |
20. | AjinkyaK. Patil, Pooja Salunkhe | Estimation of heat transfer of car radiator by using MATLAB ansys tool | Emerging Trends in Electric-Mobility & Sustainable Development : Opportunities & Challenges | National | 23-29 | 2021-22 |
Year 2020-21
Publication in H-Index Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | Dr S.K.Patil, G.L.Suryawanshi, R. G. Desavale | Evaluation of the Mechanical and Tribological Characteristics of AA6061/TiB2 Metal Matrix Composite and Parametric Optimization of Its Casting Process by using TAGUCHI Technique and NSGA-II | International Journal of Materials Engineering Innovation | 4 | 2 | 207-233 | 2020-21 | 10 | -- | -- | ISSN:1757-2762 |
2. | Dr S.K.Patil G.L.Suryawanshi | Impact of Choice based four tracks project system on development of final year Engineering students and challenges faced during implementation: Case Study”. | Journal of Engineering Education and Transformations | 34 | 01 | 25-37 | 2020-21 | 5 | -- | -- | ISSN:2394-1707 |
3. | Dr S.K.Patil R V Pawar | Structured approach enhanced quality of undergraduate capstone project : A case study | Journal of Engineering Education and Transformations | 34 | --- | 607-615 | 2020-21 | 5 | -- | -- | ISSN:2394-1707 |
4. | Dr S.K.Patil | A review on actuator and manipulator technique in soft robotics | Lecture Notes in Electrical Engineering | 200 | 01 | 123-135 | 2020-21 | 33 | -- | -- | ISSN:18761100, 18761119 |
5. | Dr. S. M. Sawant | Numerical study glass epoxy composite drive shaft for light motor vehicles | API Conference Proceedings | 2341 | 01 | 020007-1-09 | 2020-21 | 75 | -- | -- | ISSN:0094243X, 15517616 |
6. | Dr R. G. Desavale, P. M. Jadhav | Distributed fault diagnosis of rotor-bearing system using dimensional analysis and experimental methods | Elsevier- Measurement: Journal of the International Measurement Confederation | 166 | 01 | 108239(1-12) | 2020-21 | 91 | 4.072 | --- | ISSN:0263-2241 |
7. | Dr. R. G. Desavale | An overview of dynamic modeling of rolling-element bearing | Noise and Vibration Worldwide | 01 | 01 | 1-16 | 2020-21 | 14 | -- | -- | doi.org/10.1177/0957456520948279 |
8. | Dr. R. G. Desavale | Roller Element Bearing Fault Size Estimation Using Adaptive Neuro-fuzzy Inference System (ANFIS) | ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering | 07 | 01 | 011001-1-10 | 2020-21 | 13 | -- | -- | DOI: https://doi.org/10.1115/1.4048656 |
9. | Dr.R. G. Desavale | Experimental Frequency-Domain Vibration Based Fault Diagnosis of Roller Element Bearings using Support Vector Machine | ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering | 07 | 02 | 1-7 | 2020-21 | 13 | -- | -- | doi.org/10.1115/1.4048770 |
10. | B.R.Jadhav | Implementation of topsis optimization technique in comparative analysis of convention TIG and activated TIG welding of stainless steel 304L | International Journal of material Engineering Innovation | 4 | 2 | 955-961 | 2020-21 | 10 | -- | -- | ISSN:2395-4396 |
11. | M.V.Pisal, Dr.S.S.Gawade | Experimental investigation and multiobjective optimization of pin mill for pulverising Jaggeryusing Grey Relational Analysis | Solid state technology | 63 | 6 | 4319-4338 | 2020-21 | 25 | 0.053 | ISSN:038111X | |
12. | M.V.Pisal, Dr.S.S.Gawade | Multiobjective Optimization for dehydration of Jaggery in Vacuum dryer by Grey Relational Analysis | International Journal of Advanced science and Technology | 29 | 11 | 3023-3037 | 2020-21 | 15 | -- | -- | ISSN:2207-6360 |
13. | Dr.S B Kumbhar | Drum brake noise reduction | International Journal of vehicle Noise and vibration | 16 | 1 | 58-63 | 2020-21 | 16 | -- | -- | ISSN:14791471, 1479148X |
14. | R.A.Patil Dr.S B Kumbhar, | Investigation on dynamic behaviour of shape memory alloy (sma) wire embedded composite | IOP conference series : material science and engineering | 1136 | 01 | 1-11 | 2020-21 | 44 | -- | -- | Doi:10.1088/1757-898X/1136/1/012024 |
15. | Dr.S.D.Patil | Enhancement of heat and mass transfer characteristic of metal hydride reactor for hydrogen storage using various nanofliuds | International Journal of hydrogen energy | 3199 | 01 | 1-12 | 2021-20 | 215 | 5.390 | ISSN:03603199 | |
16. | Dr.A P Shah | Integral revision in semester examination and evolution of content techniques | Journal of Engineering Education and Transformations | 34 | 01 | 319-325 | 2020-21 | 5 | -- | -- | ISSN:2394-1707 |
17. | P M Jadhav | Increasing student engagement during virtual classroom teaching through effective use of online tools | Journal of Engineering Education and Transformations | 34 | 01 | 44-51 | 2020-21 | 5 | -- | -- | ISSN:2394-1707 |
18. | C.A.Waghamare | Optimization and comparatively analysis of silicon and chromium powder mixed EDM process by TOPSIS technique | Engineering and applied science Research | 48 | 2 | 1-10 | 2020-21 | 5 | -- | -- | ISSN:25396161, 25396218 |
19. | P. S. Jadhav | An optimal approach for improving the machinability of Nimonic C-263 superalloy during cryogenic assisted turning | Journal of Manufacturing Processes- Elsevier | 58 | - | 693- 705 | 2020-21 | 53 | 4.716 | -- | ISSN:15266125 |
20. | P. S. Jadhav | Simulation and Experimental investigation of tool wear rate in dry and near dry EDM process | World Journal Engineering | 1708 | 01 | 23-37 | 2020-21 | 9 | -- | -- | ISSN:17085284 |
21. | P. S. Jadhav | Design and analysis of modify four stroke four revolution engine | IOP conference series : material science and engineering | 1123 | 01 | 012043-1-10 | 2020-21 | 44 | -- | -- | ISSN:17578981, 1757899X |
22. | S.S. Shirguppikar | Experimental investigation on micro-electro discharge machining process using tungsten carbide and titanium nitride-coated micro-tool electrode for machining of Ti-6Al-4V | Advances in Materials and Processing Technologies - Taylor & Francis | 01 | 01 | 1-18 | 2020-21 | 9 | -- | -- | ISSN:2374068X, 23740698 |
23. | S.S. Shirguppikar | Accessing effect of uncoated and coated electrode on response variables in electric discharge machining for TI-AL-4V Titanium alloy | Tribology in Industry | 43 | 04 | 524-534 | 2020-21 | 23 | -- | -- | doi.org/10.24874/ti.1020.12.20.03 |
24. | S.S. Shirguppikar | Multi-objective optimization of EDM by taguechi DEAR method using ALCrNi Coated electrode | International Journal of Advances manufacturing technology | 116 | 05 | 1429-1435 | 2020-21 | 124 | -- | -- | doi.org/10.1007/s00170-021-07032-3 |
25. | S.S. Shirguppikar | Tool Wear analysis uncoated and ALCrNi coated aluminum electrode in EDM for TI-AL-4V titanium alloy | Lecture note in network and system | 178 | 01 | 832-838 | 2020-21 | 14 | -- | -- | doi.org/10.1007/978-3-030-64719-3-91 |
26. | S.S. Shirguppikar | Material remove rate in electric discharge machine with aluminum tool electrode for Ti-6A1-4V titanium alloy | Lecture note in network and system | 178 | 01 | 527-533 | 2020-21 | 14 | -- | -- | doi.org/10.1007/978-3-030-64719-3-58 |
27. | S.S. Shirguppikar | Performance analysis of multi waal cabon nanotubes coated tool EDM of titanium alloy | International manufacturing science and engineering conference ( ASME) | 8224 | 01 | 1-7 | 2020-21 | 06 | -- | -- | doi.org/10.1115MSEC2020-8224 |
28. | S.N.Jalwadi | Modeling of progressive damage in concrete using Multidimensional virtual bond method | International Journal of numerical and analytical methods in Geomechanics | 45 | 02 | 157-175 | 2020-21 | 91 | -- | -- | DOI: 10.1002/nag.3136 |
29. | R .A. Magdum | A critical review of incremental sheet forming in view of process parameters and process output | Advances in Materials and Processing Technologies | -- | -- | 1-9 | 2020-21 | 9 | -- | -- | ISSN 2374068X, 23740698 |
Publication in Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | M.V.Pisal, Dr S.S.Gawade | Mathematical model for thin layer vacuum drying kinetics of Jaggery | Indian Journal of Sugarcane Technology | 35 | 01 | 16-18 | 2020-20 | - | - | - | 0970-3233 |
2. | M.V.Pisal, Dr S.S.Gawade | Design ,development and optimization of manufacturing process for free flow jaggery powder | Indian Journal of Sugarcane Technology | 35 | 01 | 16-18 | 2020-20 | - | - | - | 0970-3233 |
3. | Dr S.S.Gawade | Design and development of liquided desiccant dehumidifier for air conditioning (LDAC)System | International Journal of Engineering Applied Sciences and Technology | 01 | 08 | 1-6 | 2020-21 | - | - | - | ISSN No. 2455-2143 |
4. | Dr S.S.Gawade | development of Gearbox for submersible mixer | International Journal of Engineering Applied Sciences and Technology | 05 | 05 | 170-175 | 2020-21 | - | - | - | ISSN No. 2455-2143 |
5. | Dr S.S.Gawade | Life prediction of an automobile component under variable amplitude loading | International Journal of Engineering Applied Sciences and Technology | 01 | 08 | 1-6 | 2020-21 | - | - | - | ISSN No. 2455-2143 |
6. | Dr S.S.Gawade | Wear analysis of varies tempered sample of stainless steel 420B | International Journal of Engineering Applied Sciences and Technology | 05 | 05 | 67-71 | 2020-21 | - | - | - | ISSN No. 2455-2143 |
7. | Dr S.S.Gawade | Design and development of electromagnetic vibration absorber | International Journal of Engineering Applied Sciences and Technology | 01 | 08 | 37-44 | 2020-21 | - | - | - | ISSN No. 2455-2143 |
8. | Dr.S.D.Patil | Selection and development of crankcase ventilation system for BS (CEV) IV of high way engine | International research Journal of engineering and Technology | 07 | 10 | 1010-1016 | 2020-21 | - | - | - | ISSN-2395-0056 |
9. | Dr.S.D.Patil | Numerical comparative study of wall share stress in coronary artery bypass grafting | International Journal of scientific research and engineering development | 02 | 05 | 820-827 | 2020-21 | - | - | - | ISSN-2581-7175 |
10. | Dr.S.D.Patil | Controlling the Growth of Sugarcane Plant in the Nursery During Germination Process by Detecting and Changing Temperature and Humidity through IoT - A Review | International Research Journal of Engineering and Technology (IRJET) | 8 | 8 | 669-676 | 2020-21 | e-ISSN: 2395-0056 | |||
11. | Dr A. P Shah S.B.Khot | Challenges faced by Fresh Graduates in COVID-19 pandemic with regard to Internship and Placement | Journal of National Institute of Personal Management | 07 | 02 | 2020-21 | - | - | - | ISSN NO. 2347-8039 | |
12. | Dr A. P Shah | Crash Analysis of Truck Cabin Structure at a speed of 60 KMPH | International Research Journal of Engineering & Technology | 07 | 10 | 891-893 | 2020-21 | - | - | - | ISSN No. 2395-0072 |
13. | Dr A. P Shah | Engine Performance and Engine Characteristics for a blend of Petrol and Ethanol with Hydrosxy Gas | International Research Journal of Engineering & Technology | 07 | 10 | 897-902 | 2020-21 | - | - | - | ISSN No. 2395-0072 |
14. | M. V. Kavade | Design and Development of Pick and Place Gantry System on Conveyor | International Research Journal of Engineering and Technology | 7 | 7 | 131-135 | 2020-21 | - | -- | -- | e-ISSN: 2395-0056, p-ISSN: 2395-0072 |
15. | Dr. R. G. Desavale, G.L.Suryawanshi, | A study on wear behavior of AA6061/ZrB2 composites by using pin on disc | International journal of Engineering applied science and Technology | 5 | 5 | 91-94 | sept-2020 | 6 | -- | -- | ISSN:2455-2143 |
16. | Dr.R. G. Desavale | The different adaptive algorithms for active vibration control of automotive component | International Journal of Engineering Applied Sciences and Technology | 5 | 5 | 72-77 | 2020-21 | 6 | -- | -- | ISSN:2455-2143, |
17. | Dr.R. G. Desavale | Design and development of mobile milk chiller | International Journal of Engineering Applied Sciences and Technology | 5 | 5 | 288-291 | 2020-21 | 6 | -- | -- | ISSN:2455-2143, |
18. | S.N.Jalwadi | Development of vibratory cavitations erosion test setup and its qualification | International Journal of Engineering Applied Sciences and Technology | 5 | 5 | 203-208 | Sept-2020 | 6 | -- | -- | ISSN No. 2455-2143 |
19. | Dr. S. B. Kumbhar | Finite Element Analysis of Saddle Support for Stack Heat Exchanger | International Journal of Engineering Applied Science and Techonology | 5 | 5 | 78-85 | 2020-21 | ISSN No. 2455-2143 | |||
20. | Dr. S. B. Kumbhar | Vibration Analysis for Fault Detection of Fluctuating Cutting Tool by Experimentally and Analytically. | International Journal of Engineering Applied Science and Techonology | 5 | 5 | 78-85 | 2020-21 | ISSN No. 2455-2143 | |||
21. | S. R. Patil | Analysis of the Tribological Behavior of Tempered SS 420B Sample at Different Temperature. | Innovative Journal for Opportunities and Development in Science and Techonology | 1 | 5 | 1-7 | 2020-21 | ISSN 2582-6026 | |||
22. | M. M. Mirza | Circular and Non-Circular Shaped Composite Component of Fiber Reinforce Epoxy Resin Material Under Loading Condition. | International Journal of Engineering Applied Science and Techonology | 5 | 5 | 78-85 | 2020-21 | ISSN No. 2455-2143 | |||
23. | M. M. Mirza | Analysis of Sugar Mill Headstock. | International Journal of Engineering Applied Science and Techonology | 5 | 5 | 217-22 | 2020-21 | ISSN No. 2455-2143 | |||
24. | M. M. Mirza | Structural analysis of cylindrical shaped composite and traditional non composite material | International Journal of Engineering Applied Sciences and Technology, | 5 | 5 | 349-351 | 2020-21 | ISSN No. 2455-2143 |
Publication in Conference Paper
Sr.No. | Authors name | Paper title | Conference Name | International/National | Page nos. If any | Year and month of publication |
1. | Dr S.S.Gawade | State of art literature review on carryover in liquid desiccant dehumidification system | Innovation in process and system design | National | 52-61 | 2020-21 |
2. | Dr A.P.Shah | Design, analysis and experimental study of worm and worm gear pair for plug valve application | at International Conference on Recent Trends in Mechanical Engineering (ICRTME | International | 1-7 | 2020-21 |
3. | Dr. S. S. Gawade | Design and Analysis of dual worm self Locking lifter | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-3 | 2020-21 |
4. | Dr. R. G. Desavale | Investigation of the effect of the number of rolling elements on vibration characteristics of cylindrical roller bearing. | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-5 | 2020-21 |
5. | Dr.S. S. Gawade | Identifying New Process for Cylinder Head Thermal Calibration. | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-4 | 2020-21 |
6. | Dr. Samir Kumbhar | Static Analysis of SMA Composite by FEA | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-7 | 2020-21 |
7. | Dr. Samir Kumbhar Prof. Ranjit Patil | Frequency shift Analysis of SMA Reinforced composite plate. | International Conference on Innovation Challenges and Advances in Engineering and Technology. ViMEET Khalapur. | International | 1-5 | 2020-21 |
8. | Dr. M. B. Mandale | Design and Development of a Rotary Torque Sensor | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-5 | 2020-21 |
9. | Dr. Samir Kumbhar Prof. Ranjit Patil | Study on Damping Behavior of SMA Reinforced Composite with Elastomeric Core. | International Conference on Innovation Challenges and Advances in Engineering and Technology. ViMEET Khalapur. | International | 1-5 | 2020-21 |
10. | Dr. Samir Kumbhar | Experimental and analytical analysis of SMA reinforced composite with elastomeric core | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-4 | 2020-21 |
11. | Dr. M. B. Mandale | Acoustic Meta-materials (AMMS) for noise reduction - Review | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-5 | 2020-21 |
12. | Dr. R. G. Desavale | Roller Bearing Fault Detection Using Vibration Parameter. | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-4 | 2020-21 |
13. | Prof. M. M. Mirza | Design and Development of Roller Belt Conveyor for Weight Reduction. | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-5 | 2020-21 |
14. | Dr. S. R. Patil | Review Paper Synthesis of Bio-Lubricants from Nao-Edible oil | International Conference on Nanotechnology and Smart Materials , Design Artificial Intelligence Manufacturing and Engineering (ICNSMDAIME-21) | International | 60-62 | 2020-21 |
15. | Dr. S. R. Patil | Synthesis of Bio-Lubricants Using Jatropha oil | National Conference – Recent Advances in Engineering and Technology ( RIT- RAIET – 2021 | National | 1-4 | 2020-21 |
Year 2019-2020
Publication in H-Index Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | Dr. S. M. Sawant | Optimization of glass epoxy composite driveshaft for light motor vehicles using fuzzy logic technique | Australian journal of mechanical engineering | 17 | 03 | 1-12 | 2019-20 | 09 | - | - | doi.org/10.1080/14484846.2019.1679004 |
2. | Dr. S. M. Sawant | Effect of oxy-hydrogen blending with gasoline on vehicle performance parameters and optimization using response surface methodology | Journal of the Chinese Institute of Engineers | 42 | 07 | 553-564 | 2019-20 | 28 | - | ISSN 0253 3839 doi.org/10.1080/02533839.2019.1638305 | |
3. | Dr.S.K.Patil, R.V. Pawar | Adoption of the Conceive-Design-Implement-Operate approach to the Third Year Project in a team-based design-build environment | Procedia of Computer science | 172 | - | 559-567 | 2019-20 | 59 | - | - | DOI: 10.1016/j.procs.2020.05.068 |
4. | Dr.S.K.Patil | Energetic teaching activity Role play and round quiz: A case study | Journal of Engineering Educations Transformation | 3 | 1 | 84-90 | 2019-20 | 03 | - | - | ISSN: 2394 - 1707 |
5. | Dr.S.K.Patil, R.V. Pawar | Project Based Learning: An Innovative Approach for Integrating 21st Century Skills | Journal of Engineering Education Transformations | 33 | 4 | 58-63 | 2019-20 | 3 | - | - | ISSN 2349-2473, eISSN 2394-1707 |
6. | Dr S.S.Gavade | Design and analysis of hydrostatic transmission (HST)system for off-highway vehicle | SAE Technical Papers | 2019-20 | 104 | - | - | ISSN 0148-7191, eISSN 2688-3627 | |||
7. | R.V. Pawar | Evolving Product Development Skills Through Group Based Activity Instructions in Engineering Exploration Course | Procedia of Computer science | 172 | - | 314-323 | 2019-20 | 59 | - | - | DOI: 10.1016/j.procs.2020.05.051 |
8. | Dr.R G Desavale | Theoretical and experimental studies to predict vibration responses of defects in spherical roller bearings using dimension theory | Measurement | 161 | - | 2019-20 | 70 | - | - | https://doi.org/10.1016/j.measurement.2020.107846 | |
9. | Dr. A P. Shah | Numerical and Experimental investigation of thermal energy storage in a conical finned tube in PCM storage unit | Journal of Mechanical Engineering | 16 | 03 | 51-65 | 2019-20 | 05 | - | - | ISSN 1823- 5514, |
10. | Dr. A P. Shah | Buoyancy-aided conjugate mixed convection with surface radiation from a vertical channel with multiple non-identical discrete heat sources | International Journal for Computational Methods in Engineering Science and Mechanics | 20 | 06 | 1-14 | 2019-20 | 19 | - | doi.org/10.1080/15502287.2020.1718799 ISSN: 1550-2287 | |
11. | Dr. A P. Shah | Synthesis and Characterization of Nano-grease for Automotive Wheel Bearing Application”, Advances in Applied Mechanical Engineering | Advances in Applied Mechanical Engineering | - | - | 413-422 | 2019-20 | 08 | - | doi.org/10.1007/978-981-15-1201-08-47 | |
12. | Dr. A P. Shah | preparation characteristic of biodiesel extractic from acidic oil:A by product of soyabean oil refining process | Lecture notes in mechanical engineering | - | - | 479-489 | 12 | doi.org/10.1007/978-981-15-2662-6-44 | |||
13. | Dr.M.B.Mandale | Experimental Investigation of different fiber orientation on damping loss factor of fiberglass composite specimens. | Materials today: Proceedings | 18 | - | 2214-7853 | 2019-20 | 18 | - | - | doi.org/10.1016/j.matpr.2019.11.208 |
14. | Dr.M.B.Mandale | Estimation of coupling loss factor for rectangular plates with different material and junction | Noise and Vibration Worldwide | 59 | 9-11 | 306-312 | 2019-20 | 13 | - | - | doi.org/10.1177/0957456519883264 |
15. | M. V. Kavade | Application of metal powder to improve metal removal rate in Electric Discharge Machining | Materials Today: Proceedings | 16 | - | 398-304 | 2019-20 | 18 | - | - | ISSN 2214-7853 |
16. | M. V. Kavade | An effective use of visual aids for teaching computer aided manufacturing (CAM) laboratory –A case study | Journal of Engineering Education Transformations | 3 | 1 | 1-6 | 2019-20 | 03 | - | - | ISSN: 2349-2473 |
17. | P. S.Jadhav S. S. Shirguppikar | Cryogenic Treatment of Nimonic Alloys- hard Turning: State -of-the-art, challenges and future directions | Materials today: Proceedings | 18 | - | 4120-4132 | 2019-20 | 18 | - | - | ISSN 2214-7853 |
18. | C.A Waghmare, S.S.Shirguppikar | Investigation of an effect of Silicon and aluminum powder PMEDM on surface integrity of AISI D2 steel | International Journal of Mechanical Engineering and Technology | 10 | 8 | 137-149 | 2019-20 | 13 | - | - | ISSN 0976-6340 |
19. | S. S. Shirguppikar, | A comparative performance study of Dry and near Dry EDM Process in Machining of spring steel material | Materials today: Proceedings | 18 | - | 5247-5257 | 2019-20 | 18 | - | - | ISSN 2214-7853 |
20. | P. S.Jadhav | Study of the Effect of Cryogenically treated tools during Rapid Drill Electro-discharge machining of Ti-6Al-4V alloy | Materials today: Proceedings | 18 | - | 3122-3127 | 2019-20 | 18 | - | - | ISSN 2214-7853 |
21. | P. S.Jadhav | Effect Of Surface Treatments On Super capacitive Performance Of SnO2-RuO2 Composite Thin Films | Materials today: Proceedings | 18 | - | 2848-2858 | 2019-20 | 18 | - | - | ISSN 2214-7853 |
22. | BR Jadhav, S.S. Shirguppikar | Experimental Investigation of Various Process Parameters of Powder Mixed Electro Discharge Machining Process for Machining of Al-Si Alloy | International Journal of Mechanical Engineering and Technology (IJMET) | 10 | 8 | 127-138 | 2019-20 | 13 | - | - | ISSN 0976-6340 |
23. | P.M.Jadhav | Optimal Forwarder Selection based on the Fuzzy TOPSIS MCDM method in Opportunistic routing protocol to enhance the performance of the MANET | International Journal of Future Generation Communication and Networking | 12 | 2 | 23-36 | 2019-20 | 01 | - | - | ISSN 2207-9645 Doi.org/10.33832/ijfgcn.2019.12.2.03 |
24. | P.M.Jadhav, P. S.Jadhav, S.B.Khot | Assessing the effectiveness of a hybrid PPBL model of delivering Workshop Practice course for the first-year engineering students | Journal of Engineering Education Transformations | 33 | - | 510-515 | 2019-20 | 03 | - | - | ISSN:2349-2473 |
25. | P.M.Jadhav | Effective Use of Online Tools to Prepare Students for Competitive Examinations | Journal of Engineering Education Transformations | 33 | - | 93-98 | 2019-20 | 03 | - | - | ISSN:2349-2473 |
26. | P.M.Jadhav, P. S.Jadhav, S.B.Khot | Teaching Engineering Design module from Engineering Exploration and Design Project (EEDP) course through hands on activities | Journal of Engineering Education Transformations | 33 | - | 11-18 | 2019-20 | 03 | - | - | ISSN:2349-2473 |
27. | A.M.Mulla | Startup Entrepreneurship Support for Design & Development of Problem Statement | Journal of Engineering Education & Transformation(JEET) | 33 | - | 32-39 | 2019-20 | 03 | - | - | ISSN:2349-2473 |
28. | Dr.S.S Gawade, Dr.S R Patil, Dr.R G Desavale | An Experimental investigation of Electro rheological fluid damper recoil system used in heavy duty application | ASME International Mechanical Engineering Congress and Exposition (Conferences and Proceedings) | 104-109 | 2019-20 | 29 | - | - | https://doi.org/10.1115/IMECE2019-10424 |
Publication in Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1 | Dr. S. M. Sawant | Investigation on glass-epoxy composite drive shaft for light motor vehicle | International Journal of Design Engineering | 09 | 1 | 22-35 | 2019-20 | - | - | - | - |
2 | Dr.M.B.Mandale | A performance study on indirect acoustic flow resistivity measurement methods | Journal of Noise theory and practice | - | - | 7-17 | 2019-20 | - | - | - | - |
3 | Dr.S.D.Patil | Numerical Analysis of heat transfer enhancement in artificially roughened solar air heater | Springer Processing | 2 | - | 297-303 | 2019-20 | - | - | - | Doi.org/10.1007/987-981-15-2662-6-28 |
4 | B.R.Jadhav | Review paper of dry machining | International Journal of science and technology | 6 | 7 | 11-18 | 2019-20 | - | - | - | ISSN: 2349-784X |
5 | S.V. Kadam | Heat Transfer Enhancement by the Usage of Low Concentration MgO-Water Nanofluid | International Journal of Engineering and Advanced Technology (IJEAT) | 9 | 1 | 1985-1990 | 2019-20 | - | - | - | ISSN: 2249 – 8958 |
6 | Dr.R G Desavale | Modeling, attenuation and fow feld analysis of diesel engine muferusing fuid structure interaction approach and experimental analysis | SN Applied Sciences | -- | - | 1-11 | 2019-20 | - | - | |https://doi.org/10.1007/s42452-020-2683-6 |
Publication in Conference Paper
Sr.No. | Authors name | Paper title | Conference Name | International/National | Page nos. If any | Year and month of publication |
1. | Dr.S.K.Patil, | Critical Overview on optimization techniques of friction stir welding of aluminum alloy | International Conference on Industrial Engineering (ICIE-2019) | International | 793-799 | 2019-20 |
2. | Dr.S.K.Patil, R.V. Pawar | Adoption of the Conceive-Design-Implement-Operate approach to the Third Year Projection a team-based design build environment |
9th world Engineering Education Forum (WEEF - 2019) | International | 1-9 | 2019-20 |
3. | Dr.S.K.Patil P. A. Patil, | Nano-particle Based Cutting Fluid Applied in Minimum Quantity Lubrication Method for Machining: A Review | International Conference on International Engineering 2019 | International | 771-778 | 2019-20 |
4. | Dr.S.K.Patil P.C. Chavan, , A.K. Patil | Taguchi based optimization of machining of AISI 4140 steel by TOPSIS approach | International Conference on Industrial Engineering (ICIE-2019) | International | 587-590 | 2019-20 |
5. | Dr.S.S.Gavade | Characterization of Mechanical Properties of different agro derived reinforced aluminum alloy matrix composite: review | International conference on Machines and Mechanisms | International | 2019-20 | |
6. | P.C.Chavan, M.L.Deshpande , A.K. Patil | Improving Practical Skill in metrology and quality control by TTSM | ICTIEE 2020 | International | 1-3 | 2019-20 |
7. | A.K. Patil P.C. Chavan | “ABDP: Activity Based Approach to Develop Students Conceptual Understanding of the Course Recycling and Regeneration Technology” | ICTIEE 2020 | International | 202 | 2019-20 |
8. | Dr. A. P. Shah | Crash Pulse and its Severity on Automotive Seats | 7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019) | International | 1-5 | 2019-20 |
9. | Rajendra Pawar | Evolving Product Development Skills Through Group Based Activity Instructions in Engineering Exploration course | 9th world Engineering Education Forum (WEEF - 2019) | International | 1-10 | 2019-20 |
10. | P.M.Jadhav | QoS based Routing using the Fuzzy TOPSIS MCDM method to enhance the performance of the MANET | International Conference for Convergence in Technology 2019 | International | 2019-20 | |
11. | P.M.Jadhav | Effective use of videos in classroom teaching for internet technology lab course | National Conference on Exploring new dimensions in teaching learning for quality education | National | 93-97 | 2019-20 |
12. | M.V.Pisal | Failure Mode & Effect Analysis of spring Salvage Process | QUEST 2K19 | National | 1-5 | 2019-20 |
13. | S. S. Shirguppikar | Grey Fuzzy Multiobjecive Optimization of Process Parameters for Dry Electro Discharge Machine Process. | International Conference on Recent Advances in Materials and Manufacturing | International | 2019-20 | |
14. | S.B.Khot | Sustainable and resilient supply chain practices in Indian automotive industry: A review | International Conference on Operations Research and Decision Sciences 2019 | International | 2019-20 | |
15. | S.B.Khot | Framing enablers, barriers and risks to build sustainable-resilient supply chain: Indian automotive perspective | International Conference on Operations Research and Decision Sciences 2019 | International | 2019-20 |
Year 2018-19
Publication in H-Index journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No./DOI no. |
01 | Dr.R.G.Desavale | Dynamics Characteristics and Diagnosis of a Rotor-Bearing's System through a Dimensional Analysis Approach: An Experimental Study | ASME-Journal of computational and nonlinear dynamics | 14 | 01 | 2018-19 | 37 | 1.996 | - | Doi: 10.1115/1.4041828 | |
02 | S.R.Patil Dr.S.S.Gavade | Performance characterization and selection of electrorheological fluid for damper useful for recoil minimization in heavy-duty application | International journal of mechanical engineering and technology | 10 | 02 | 1059 | 2018-19 | 11 | - | - | ISSN:0976-6359 |
03 | Dr.S.S.Gavade | Numerical analysis of femur bone by using finite element method | Series on Biomechanics | 32 | 03 | 56-62 | 2018-19 | 03 | ISSN 1313-2458 | ||
04 | S. B. Khot | Resilience and sustainability of supply chain management in the Indian automobile industry | International journal of data network science | - | 03 | 339-348 | 2018-19 | 06 | - | - | Doi:10.5267/j.ijdns2019.4.002 |
05 | P. S.Jadhav | Electrochemical properties of chemically synthesized SnO2-RuO2mixed film | Material for renewable and sustainable energy | 08 | 01 | 5-11 | 2018-19 | 12 | - | - | Doi:.org/10.1007/s40243-018-0138-4 |
06 | Dr.S.D.Patil, R.V.Pawar Dr.A.P.Shah | Experimental Analysis of effect of mixed Biodiesel Blends on Performance, Combustion and Emission of Variable Compression Ratio Engine. | Modeling ,Measurement and Control C | 08 | 1 | 24-31 | 2018-19 | 06 | Doi:.org/10.18280/mmc c.800105 |
Publication in Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | Dr.S.M Sawant | Numerical analysis of solar air heater using CFD | Journal of emerging technology and innovation research | 6 | 4 | 461-466 | 2018-19 | - | - | - | ISSN:23495162 |
2. | Dr.S.S.Gavade | Experimental stress analysis of worm wheel used crate washer gear box | International research journal of engineering and technology | 6 | 6 | 2180-2185 | 2018-19 | - | - | - | ISSN:2395-0056 |
3. | Dr.A.P.Shah | Enhancement of heating surfaces area in steam boiler:-A review | Journal of mechanical and civil engineering | - | - | 44-47 | 2018-19 | - | - | - | ISSN:2320-334X |
4. | Dr.A.P.Shah | A survey on Automotive seat and factors affecting its design | International journal of innovative research in science, engineering and technology | 08 | 04 | 4497 | 2018-19 | - | - | - | ISSN:2319-8753 |
5. | Dr.A.P.Shah | Numerical Analysis of heat transfer for various shapes of dimple surfaces | Journal of emerging technology and innovative research | 06 | 04 | 544 | 2018-19 | - | - | - | ISSN:2349-5162 |
6. | P. S. Jadhav, P. M. Jadhav S.B. Khot | A novel approach towards first year engineering workshop practice course with combination of project and product based learning (PBL) for improved and joyful learning. | Journal of Engineering Education & Transformation | - | - | - | 2018-19 | - | - | - | |
7. | S.R.Patil | Enhancing Productivity of Special Purpose Machine by Application of Automation to Loading and Unloading Utilizing Programmable Logic Controller. | International Journal of Emerging Technologies and Innovative Research | 06 | 05 | 658-665 | 2018-19 | - | - | - | ISSN:2349-5162 |
8. | B.R.Jadhav | Experimental investigation of cryogenic machining of EN-19 steel | Journal of emerging technologies and innovative research | 06 | 04 | 634 | 2018-19 | - | - | - | ISSN:2349:5162 |
9. | B.R.Jadhav, S.S Shirguppikar | Performance investigation of powder mixed electro discharge machining of hydro eutectic AL-Si alloy using brass electrode. | International journal of materials forming and machining processes. | 06 | 02 | 31 | 2018-19 | - | - | - | Doi: 10.4018/ijmfpm.2019070103 |
10. | C.A.Waghmare | Design of Lean Manufacturing. | International journal of research in advent technology | - | - | 40 | 2018-19 | - | - | - | ISSN:2321:9637 |
11. | R.A. Magdum | Material Based FEA Analysis of a Go-Kart Chassis: A Comparative Study | Advanced Engineering Forum | 31 | - | 11-25 | 2018-19 | - | - | - | ISSN: 2234-991X |
12. | S.V.Kadam | Performance evaluation of automotive radiator by using Hybrid nano fluid based coolant. | International Journal of Management , Technology And Engineering | 9 | 6 | 346-350 | 2018-19 | - | - | - | ISSN : 2249-7455 |
Publication in Conference Paper
Sr.No. | Authors name | Paper title | Conference Name | International/National | Page nos. If any | Year and month of publication |
1. | Dr.S. K. Patil | Toward Outcome Based Education (OBE): An Impact of Active Learning Approach for ‘Computer Organization’ Course | The sixth international conference on transformations in engineering education 2019 | International | 1-4 | 2018-19 |
2. | Dr. S. K. Patil P. A. Patil, | Effective Use of Microsoft Excel for Teaching Application Oriented Transportation Problems | The sixth international conference on transformations in engineering education 2019 | International | 1-5 | 2018-19 |
3. | Dr.S. K. Patil , R. V. Pawar | Project based learning: an innovative approach for integrating 21st century skills | The sixth international conference on transformations in engineering education 2019 | International | 1-3 | 2018-19 |
4. | P. C .Chavan, Dr. S. K. Patil | ABDP: The Shop Floor Experience to Improve Students' Conceptual Understanding of the Course Metrology & Quality Control | The sixth international conference on transformations in engineering education 2019 | International | 1-4 | 2018-19 |
5. | Dr.S.S.Gawade | Investigation of strength of butt welded joint in ship structure Sic and CNT nanoparticle as filler material using FEA | 1st International conference on Materials science and Engineering | International | 851-860 | 2018-19 |
6. | Dr.S.S.Gawade | Development of over molded panel Air filter for secondary filter application | International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -65 | International | 542-547 | 2018-19 |
7. | Dr.S.S.Gawade | Fatigue life of Axle beam die | International conference on Automation Science and Engineering | International | 47-50 | 2018-19 |
8. | Dr.S.S.Gawade | Tribo-corrosion behavior of Nitronic -50 stainless steel in nitric acid solution | International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -65 | International | 534-541 | 2018-19 |
9. | Dr.S.S.Gawade | Design and Analysis of Hydrostatic Transmission (HST) system for OFF-Highway vehicle. | International Conference on Intelligent Transportation System | International | ||
10. | Dr.S.M. Sawant | Prediction of primary atomization of urea water spray using converge CFD | International conference Convergent Science | International | 1-5 | 2018-19 |
11. | Dr.S.M. Sawant | A caparisons of prediction of primary automation of urea water spray using major commercial CFD codes | National conference on recent trends in engineering and technology | National | 1-6 | 2018-19 |
12. | Dr.S.M. Sawant | Cooling load calculation procedure for homemade ice cream maker | Nation conference on recent trends in engineering and technology | National | 10-16 | 2018-19 |
13. | M.V. Kavade | Process Parameter analysis of powder mixed WEDM for surface Roughness and Material Removal Rate using Analysis of variance Technique. | NCRTME | National | 48 | 2018-19 |
14. | M.V. Kavade | Optimization of process parameters of powder mixed WEDM using grey relational analysis technique. | International conference on recent innovation &Developments in mechanical engineering. | International | 2018-19 | |
15. | M.V. Kavade | Design and performance analysis of air cooled heat exchanger for hydraulic power pack. | International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -105 | International | 683-698 | 2018-19 |
16. | Dr.S.D.Patil | A Review on thermal analysis of Nano particle based fluid- | International Conference on recent advances in materials Manufacturing and Energy system. Paper ID-TE028 | International | 1-7 | 2018-19 |
17. | Dr.S.D.Patil | Techno-economic analysis of the solar, wind and hybrid systems | proceedings of the national conference on emerging trends in mechanical engineering(NCETME-2019) | National | -- | 2018-19 |
18. | Dr.S.D.Patil | Design and analysis of oven for heat loss used for drying panted three wheeler chassis | 1st International conference on Materials science and Engineering | International | -- | 2018-19 |
19. | M.B.Mandale | Evolution of effect of fiber orientation on the modal density of composite plates using ANSYS ACP Tool | 1st International conference on Materials science and Engineering | International | 408-420 | 2018-19 |
20. | M.B.Mandale | Study on the effect of geometry change after treatment outlet pipe on its weld and fatigue life. | 1st International conference on Materials science and Engineering | International | 523-533 | 2018-19 |
21. | M.B.Mandale | Vibration and noise reduction of machines by statistical energy Analysis. | 1st International conference on Materials science and Engineering | International | -- | 2018-19 |
22. | M.B.Mandale | Investigation of sound pressure level of front-loaded washing machine by using numerical method. | 1st International conference on Materials science and Engineering | International | 587-594 | 2018-19 |
23. | M.B.Mandale | Development of Fixture for testing Emission conformance of Three Wheeler Vehicles according to B. S. - VI Norms on a chassis Dynamometer Test Rig. | International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -114 | International | 788-803 | 2018-19 |
24. | M.V.Pisal | Failure Mode and Effect Analysis of Spring Salvage Process. | International | -- | 2018-19 | |
25. | Dr.R.G.Desavale | Dimensional and experimental analysis of rolling element bearing based on distributed defects. | 1st International conference on Materials science and Engineering | International | -- | 2018-19 |
26. | Dr.R.G. Desavale | Computational fluid dynamics Analysis of various types of shell and tube heat exchanger. | International Conference on automation science and engineering | International | 44-49 | 2018-19 |
27. | Dr.R.G. Desavale | Finite Element stress analysis of NTIW heat exchanger. | International Conference on automation science and engineering | International | 50-55 | 2018-19 |
28. | Dr. R. G. Desavale | Reciprocal questioning (ReQuest) procedure for group learning | National Conference on Exploring New Dimensions in Teaching for Quality Education | National | 90-92 | 2018-19 |
29. | Dr. R. G. Desavale | Tribo-Corrosion Behaviour of Nitronic -50 Stainless Steel In Nitric Acid Solution. | International Conference on Materials Science and Engineering (ICMSE) Held from June 11 – 12, 2019. Paper Id -80 | International | 522-541 | 2018-19 |
30. | Dr. A. P. Shah | Enhancement of capacity steam production in bagasse fired steam boiler | international conference on recent advances in material manufacturing and energy systems-2019 | International | 1-5 | 2018-19 |
31. | Dr.A.P.Shah | Synthesis and characterization of Nano-Grease for automotive wheel bearing application | ICAMER2019 Warangal | International | 65-69 | 2018-19 |
32. | S.V.Kadam , A. B. Chougule | CFD study of Propeller blade temperature for pusher-configured turbo-Prop Engine. | THERMACOMP2018 | International | 468-473 | 2018-19 |
33. | S.V.Kadam | Numerical Investigation on thermo-hydraulic performance of tube with wire coil Inserts. | THERMACOMP2018 | International | 900-904 | 2018-19 |
34. | S.V.Kadam | Numerical Analysis and optimization of thermo-Hydraulic performance in tube provided with thin wire rib roughness by Taguchi Approach. | THERMACOMP2018 | International | 668-673 | 2018-19 |
35. | S.V.Kadam | Effect of Nano fluid in heat transfer enhancement: A Review. | International Conference International Journal of Scientific Research and Review | International | 614-618 | 2018-19 |
36. | S.R.Patil | CAD Customization of Hydraulic cylinder” | 1st International conference on Materials science and Engineering | International | 413-424 | 2018-19 |
37. | S.R.Patil | Enhancing Productivity of Special Purpose Machine By Application of Automation to | International conference on Automation Science and Engineering | International | 40-30 | 2018-19 |
38. | S.R.Patil | Fatigue Life Evaluation of Agitator Notch Filter Dryer | International conference on Automation Science and Engineering | International | 37-39 | 2018-19 |
39. | S. B. Khot, P. S.Jadhav | Delivery of an Elective Course by Blending Innovative Pedagogy Techniques and Measurement of Its Impact on Performance of the Students | The sixth international conference on transformations in engineering education 2019 | International | 1-4 | 2018-19 |
40. | S. B. Khot | Design of sliding unit in body in whiten(BIW0welding welding fixture for an automobile component and investigation of critical component | 1st International conference on Materials science and Engineering | International | 55-61 | 2018-19 |
41. | P. M. Jadhav | Effective use of videos in classroom teaching for internet technology laboratory course | National conference on exploring new dimension in teaching learning for quality education | National | 93-99 | 2018-19 |
42. | G. L. Suryawanshi, P. M. Jadhav , P. S.Jadhav | A Systematic Approach Of Quantitative Aptitude Preparation by using Collaborative learning Techniques-RIT Experience | The sixth international conference on transformations in engineering education 2019 | International | 1-6 | 2018-19 |
43. | P.C.Chavan A.K.Patil | Taguchi based optimization of machining parameter in drilling spheroidal graphite using combined TOPSIS and AHP Method | International conference on advanced engineering optimization through intelligent techniques | International | 1-5 | 2018-19 |
44. |
S. N. Sawant, P. V. Gunjavate | Problem based learning to get the RID of orthographic projection in engineering graphics course | The sixth international conference on transformations in engineering education 2019 | International | 266-269 | 2018-19 |
45. | S. B. Kumbhar | Piezoelectric energy generation as result of structural damping | 1st International conference on Materials science and Engineering | International | 536-552 | 2018-19 |
46. | S. B. Kumbhar | Static structural analysis of different nozzle with header | 1st International conference on Materials science and Engineering | International | 562-574 | 2018-19 |
47. | S. B. Kumbhar | Reduction of drum brake noise | 1st International conference on Materials science and Engineering | International | 754-763 | 2018-19 |
48. | S. B. Kumbhar | Study nature and behavior of vibration signals recorded by accelerometer and wear rate on PIN-ON-DISC tribometer using MATLAB tool | 1st International conference on Materials science and Engineering | International | 764-776 | 2018-19 |
49. | U. M. Nimbalkar | Reducing gyroscopic effect while using flywheel by means of alternate arrangements of small scale multiple flywheel | 1st International conference on Materials science and Engineering | International | 777-787 | 2018-19 |
50. | U. M. Nimbalkar | Design and development of fiber reinforced polymer by varying thickens of sections | 1st International conference on Materials science and Engineering | International | 829-44 | 2018-19 |
51. | L. R. Patil, S. S. Shirguppikar | Effective teaching of finite element method for undergraduate and post graduate students | National Conference on Exploring New Dimensions in Teaching for Quality Education | National | 199-201 | 2018-19 |
52. | L. R. Patil, S. S. Shirguppikar | Project Based Learning approach to teach industrial engineering. | National Conference on Exploring New Dimensions in Teaching for Quality Education | National | 267-269 | 2018-19 |
53. | S. S. Shirguppikar, S.R.Patil, S.A.Lavate | Experimental Investigation of Micro Electric Discharge Machining of Titanium Grade 5 | International Conference Recent Advances in Materials, Manufacturing and Energy Systems | International | 24 | 2019-20 |
54. | S. S. Shirguppikar, Dr.S.D.Patil | Effect of Different Electrode Materials on the Performance of EDM: A Review | International Conference Recent Advances in Materials, Manufacturing and Energy Systems | International | 23 | 2019-20 |
55. | P.V.Gunjavate | Effect of Alkali treated Banana fibers on tensile properties of bio-composite material. | International research journal of engineering and technology (IRJET) | International | 986 | 2018-19 |
56. | M.M.Mirza | Finite Element Analysis for large size Butterfly valve. | 1st International conference on Materials science and Engineering | International | 512-522 | 2018-19 |
57. | M.M.Mirza | A Comparative study of different crown material. | 1st International conference on Materials science and Engineering | International | 553-561 | 2018-19 |
58. | M.M.Mirza | Numerical Analysis for stiffness of Anti-roll Bar. | 1st International conference on Materials science and Engineering | International | 507-514 | 2018-19 |
59. | M.M.Mirza | Vibration Analysis of flexible narrow tubes using Acoustic excitation. | WESPAC2018 | National | 1 | 2018-19 |
60. | S. N. Jalwadi | CAD Automation of Heat Exchanger using NX CAD Software. | International Conference on Materials Science and Engineering (ICMSE). | International | 725-736 | 2018-19 |
61. | S. N. Jalwadi | Design optimization and Simulation of pattern layout and gating system of Differential Housing | International Conference on Materials Science and Engineering (ICMSE). | International | -- | 2018-19 |
62. | S. N. Jalwadi | Optimization of Z-pin pattern to enhance bridging force by using Virtual Internal Bond Technique | International Conference on Materials Science and Engineering (ICMSE). | International | -- | 2018-19 |
Year 2017-18
Publication in H-Index Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No./DOI no.. |
1. | S.B.Kumbhar, Dr.S.S.Gavade | Dynamic Performance analysis ofmagneto heologicalelastomer-shape memory alloy composite. | Journal of vibration Engineering and technologies. | 5 | 6 | 2017-18 | 9 | - | - | ISSN: 14775360 | |
2. | S.B.Kumbhar, Dr.S.S.Gavade | Adaptive Tuned Vibration absorber based on manetorheological elastomer-shapes memory alloy composite | Mechanical system and signal processing | - | - | - | 2017-18 | 121 | 4.116 | - | DOI: 10.1016/2017.7.27 0888-3270 |
3. | S.B.Kumbhar, Dr.S.S.Gawade | Two way stiffness turning of Magneto rheological elastomer shape memory alloy composite | Materials today proceeding. | 5 | 5 | 13211-13223 | 2018-18 | 11 | - | - | Doi.org/0.1016/j.matpr.2018.02.311 |
4. | M.V.Kavade | Goal setting and faculty development in an Indian engineering college. | American Society for Engineering Education | 0 | 0 | 1-16 | 2017-18 | 5 | - | - | - |
5. | M. B. Mandale | Effect of changes in fiber orientation on model density of fiber glass composite plate. | Materials today proceeding | 0 | 0 | 5783-5791 | 2017-8 | 11 | - | - | ISSN:2214-7853 |
6. | Dr A. P. Shah, Dr S. D. Patil | Performance, Emission and Combustion Analysis of Biodiesel Extracted from Acidic oil: A By-product of Soybean Oil Refining Process | Modeling, Measurement and Control | 78 | 0 | 337-350 | 2017-18 | 5 | - | - | - |
7. | S.R.Patil Dr.S.S.Gawade | Preparation characterization and performance analysis of BTO based high yield straight electo rheological fluid in artillery gun recoil system using FEA approach. | Materials today proceeding | 5 | 2 | 8222-8231 | 2017-18 | 11 | - | - | ISSN:2214-7853 |
8. | P S Jadhav | Facile synthesis and photo electrochemical performance of SnSe thin films | American Institute of Physics | 1953 | 1 | 2017-18 | 24 | - | - | DOI-10.1063/1.5032710 | |
9. | P S Jadhav , S S Shirgupikar | Experimental investigation of CNT coated tools for EDM Processes. | Materials today proceeding | 7 | 2 | 7795-7603 | 2017-18 | 11 | - | - | ISSN:2214-7853 |
10. | S S Shirgupikar | Experimental investigation of dry eclectic discharge machine(Dry EDM ) Process on Bright Mild steel | Materials today proceeding | 5 | 2 | 7131-7140 | 2017-18 | 11 | - | - | ISSN:2214-7853 |
11. | R.V.Pawar | A Comprehensive review on influence of biodiesel and additive performance and emission of diesel engine | Chemical engineering transactions | 65 | 0 | 451-456 | 2017-18 | 25 | - | - | ISSN:2283-9216 |
12. | Dr.S.M.Sawant | Effect of Oxy-Hydrogen Addition in Gasoline on Engine Performance, Combustion Characteristics and Combustion Process at Different CR and IA. | Int. J.of applied engineering research | 13 | 11 | 10038-10047 | 2017-18 | 35 | - | - | ISSN:0973-4562 |
13. | Dr.S.M.Sawant | Response Surface Methodology (RSM)Based Optimization of engine operating parameters fuelled with blends of diesel and oxy-hydrogen gas. | Int. J.of mechanical and mechatronics engineering | 18 | 2 | 22-31 | 2017-18 | 9 | - | - | - |
14. | Dr.S.M.Sawant | Experimental stuies on magnetoreholgical brake for automotive application | Int. J.of automotive and mechanical engineering | 15 | 1 | 4893-4908 | 2017-18 | 19 | - | - | ISSN:2229-8649 |
15. | Dr.S.M.Sawant | Simulation -based estimation of an automotive magnetorheological brake system performance | Journal of advanced research | 14 | 43-51 | 2017-18 | 28 | - | - | Doi.org/10.1016/j.jare..2018.05.011 | |
16. | Dr.S.M.Sawant | A Review of laminar flame speed measurement technique with advantages and challenges involve in a use of hydrogen-methane blend in existing internal combustion engines | Journal of computational information system | 14 | 1 | 18-22 | 2017--18 | 21 | - | - | ISSN:1553-9105 |
17. | Dr.S.M.Sawant | A Comparative study on automotive brake testing standards. | Journal Inst .Eng. India ser. | 98 | 4 | 527-531 | 2017-18 | 7 | - | - | DOI.10.1007/s40032-016-0289-y |
Publication in Journal Paper
Sr.No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. |
1. | Dr.S.S.Gawade | Weight Optimization And Buckling Analysis Of Tie Rod Using CFRC Material | International Journal of Advance Research in Science and Engineering | 7 | - | 726-732 | 2017-18 | - | - | - | ISSN:2319-8354 |
2. | M.V.Kavade | Study and review of heat recovery system for SO2 gas generation process in sugar industry. | International research journal of engineering and technology | 4 | 11 | 485 | 2017-18 | - | - | 6.171 | ISSN:2395-0072 |
3. | B.R.Jadhav | Optimization of casting process parameters through simulation | International journal of advance research in science Engineering. | 7 | 3 | 686-692 | 2017-18 | - | - | - | ISSN:2319-8354 |
4. | S.V Kadam | Numerical analysis of proper blade temperature for optimized stub of pusher configured turboprop aircraft. | International journal of innovative research in science engineering and technology | 7 | 4 | 3444-3452 | 2017-18 | - | - | - | ` ISSN(Online): 2319 - 8753 ISSN (Print): 2347 - 6710 |
5. | Dr A. P. Shah | CFD Analysis of Heat Transfer Enhancement in Pipe Flow using Nanofluid | International Advanced Research Journal in Science, Engineering and Technology | 4 | 1 | 7-12 | 2017-18 | - | - | - | DOI – 10.17148/IARJSET.2017.4102 |
6. | Dr A. P. Shah | Modeling and Analysis of High Thermal Conductivity Heat Pipe Thermal Ground Planes | International Journal of Scientific Development and Research | 1 | 10 | 87-93 | 2017-18 | - | - | - | ISSN: 2455-2631 |
7. | C.A.Waghmare | Quantification of bullwhip effects its supply chain management. | International journal of advance research in science Engineering. | 7 | 0 | 5557-5565 | 2017-18 | - | - | - | ISSN:2454-7875 |
8. | U.M. Nimbalkar | Contact analysis of real wheel using finite element technique-A Review | International journal of advance research in science Engineering. | 7 | 1 | 921-932 | 2017-18 | - | - | - | ISSN:2319-8354 |
9. | U.M. Nimbalkar | Casting simulation to identify shrinkage zone in flywheel casting by using pro-cast | International journal of advance research in science Engineering. | 7 | 1 | 956-962 | 2017-18 | - | - | - | ISSN:2319-8354 |
10. | S.R.Patil | Ceramic Reinforced metal matrix composite processing | International journal of advance research in science Engineering. | 7 | 3 | 861-869 | 2017-18 | - | - | - | ISSN:2319-8354 |
11. | S.R.Patil | Numerical analysis of ultra high temperature ceramic for aerospace application. | International journal of advance research in science Engineering. | 7 | 3 | 799-804 | 2017-18 | - | - | - | ISSN:2319-8354 |
12. | S.R.Patil | Synthesize and fabrication of artificial human bone developed by using nano composite | International journal of advance research in science Engineering. | - | - | 2017-18 | - | - | - | - | |
13. | P S Jadhav | Analysis of variance for MRR on ECDM. | International journal On theoretical and applied research in mechanical engineering. | 1 | 7 | 119-123 | 2017-18 | - | - | - | ISSN:2319-3182 |
14. | P S Jadhav | 'Experimental setup design forElectrochemical Discharge Machining | Global Journal of Engineering Science and Research Management | - | - | - | - | - | - | - | ISSN 2349-4506 |
15. | P M. Jadhav | An integrated approach for teaching object oriented programming (C++) course. | Journal of Engineering Education and transformation. | 31 | 3 | - | 2017-18 | - | - | - | ISSN:2349-2473 |
16. | R.V.Pawar | Development of (aluminum and E-glass fiber) hybrid composite double lap riveted joint for tension and validate by FEM software | International Research Journal of Engineering and technology | 5 | 3 | 1375-1381 | 2017-18 | - | - | 6.171 | ISSN:2395-0056 P2395-0072 |
17. | M. M. Mirza | Design and Analysis of Axle for Improved Stability of Bullock Cart | International journal of advance research in science Engineering. | 7 | 3 | 1222-1227 | 2017-18 | - | - | - | ISSN:2319-8354 |
18. | Dr.R.G. Desavale | Development of Asbestos free Friction Material | International journal of advance research in science Engineering | 7 | 3 | 853-860 | 2017-18 | - | - | - | ISSN:2319-8354 |
Publication in Conference Paper
Sr. No. | Authors name | Paper title | Conference Name | International/National | Page nos. If any | Year and month of publication |
1. | Dr.S.K.Patil, P.A.Patil | Advances in Abrasive Flow Machining Technology for Fine Finishing: A Review | 4th International Conference on Industrial Engineering. | International | 496 | 2017-18 |
2. | Dr. S. K. Patil | Experimental investigation on heat assisted drilling machine | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18). | National | 572 | 2017-18 |
3. | Dr. S. M. Sawant | Numerical analysis of application of vortex generator in perforated plate-fin heat sink | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18). | National | 395 | 2017-18 |
4. | Dr. S. M. Sawant | Numerical analysis of circular fins in triplex heat exchanger with pcm | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18). | National | 399-402 | 2017-18 |
5. | Dr. S. M. Sawant | Parametric Analysis of Centrifugal Pump Impeller | International Journal of Advance Research in Science and Engineering. | National | 680-685 | 2017-18 |
6. | Dr. S. M. Sawant | Numerical analysis of Perforated Plate Pin Fin type of Heat Sink | International Journal of Advance Research in Science and Engineering. | National | 664-672 | 2017-18 |
7. | Dr. S. M. Sawant | Numerical analysis of fin-and-tube heat exchanger for punch delta winglet vortex generator with hole | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) . | National | 403-408 | 2017-18 |
8. | Dr. S. S. Gawade | experimental analysis of femur bone by strain gauge method | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18). | National | 497 | 2017-18 |
9. | Dr. S. S. Gawade | Stress analysis of worm wheel used in crate washer gear box | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 510 | 2017-18 |
10. | Dr. S. S. Gawade | Design, modeling, and fabrication of non - circular gears | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 520 | 2017-18 |
11. | Dr. S. S. Gawade | Analysis Of Gerotor In A Lubricating Oil Pump | International Conference on New Era in Technologies, Science and Role of Management | International | 473-483 | 2017-18 |
12. | B.R.Jadhav | Experimental investigation of hot machining of en- 19 steel | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 562 | 2017-18 |
13. | B.R.Jadhav | Experimental investigation of parameters influencing on fsw of aa6061 and aa6063 | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 566 | 2017-18 |
14. | M.V.Kavade, P.S.Jadhav, S.B.Khot | Pedagogical Reform for delivering an open elective course at undergraduate level and analysis of its impact on student performance | International Conference on Transformation in Engineering Education (ICTIEE-18) | International | - | 2017-18 |
15. | M.V.Kavade | Experimental investigation of drilled epoxy resin glass fiber by using filler materials | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 576 | 2017-18 |
16. | M.V.Kavade | Behavior of inline knockout machine operating under vibration | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 438-443 | 2017-18 |
17. | M.V.Kavade | Feasibility study of electromagnetic aircraft launching system (emals) by using advance analysis tools | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 444-447 | 2017-18 |
18. | M.V.Kavade | Stress analysis of functionally graded shell | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 448-457 | 2017-18 |
19. | M.V.Kavade | Development of automatic control system & performance analysis of heat recovery system in so2 gas generation process | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 485-489 | 2017-18 |
20. | M. B. Mandale | Stress concentration analysis of composite plate with different cut-out for varying load condition | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 501 | 2017-18 |
21. | M. B. Mandale | Numerical analysis of water turbine for small scale power generation (horizontal axis perpendicular to flow water turbine) | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 505 | 2017-18 |
22. | M. B. Mandale | Numerical study of stresses in dental materials by using finite element analysis | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 514 | 2017-18 |
23. | M. B. Mandale | Implementation of two-cavity method for measuring the flow resistivity of acoustic material | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 547-551 | 2017-18 |
24. | M. B. Mandale | Design of mechanism for retrieval of tray in STO lift machine. | International Conference new era technology in science Engineering and role of management. | International | - | 2017-18 |
25. | Dr.S.D.Patil | Numerical Investigation of mini-channel metal hydride reactor for hydrogen storage | 2nd International Conference of heat and mass transfer (IHMTC-2017) | International | - | 2017-18 |
26. | Dr.S.D.Patil | Numerical Investigation of influence of variation in offset ribs on fluid flow and heat transfer in micro channel heat sink | 2nd International Conference of heat and mass transfer (IHMTC-2017) | International | - | 2017-18 |
27. | Dr.S.D.Patil | Mathematical modeling of evaporation of water droplet, its implementation and validation | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 409-413 | 2017-18 |
28. | Dr.S.D.Patil | Numerical analysis of steam flow in steam turbine nozzle blade cascade | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 414-417 | 2017-18 |
29. | Dr.S.D.Patil | Numerical analysis of splitted cylindrical metal hydride hydrogen storage reactor | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 418-423 | 2017-18 |
30. | Dr.S.D.Patil | Techno-economic analysis of solar pv system | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 424-428 | 2017-18 |
31. | Dr.S.D.Patil | Simulation of thermo mechanical stress in gas turbine blade of an aero engine under service condition. | NCRTME-17 | National | - | 2017-18 |
32. | Dr.S.D.Patil | Numerical investigation of design mono hull under extreme irregular sea condition using boundary element. | International Conference on immerging technology in mechanical engineering. | International | 2017-18 | |
33. | Dr. S.D. Patil | Numerical Analysis of Heat Transfer Enhancement in Artificially Roughened Solar Air Heater. | 6th International Conference on Advances in Energy Research At IIT Bombay. | International | 1-6 | 2017-18 |
34. | R.G.Desavale | Investigation of vibration characteristics of rotor-bearing system due to unbalanced and clearance using dimensional analysis | International Conference on vibration problem. | International | - | 2017-18 |
35. | R.G.Desavale | Influences of instantaneous defective frequency on speed and life of ball bearing | International Conference on vibration problem. | International | - | 2017-18 |
36. | R.G.Desavale | Dynamic modeling of a rotor bearing structure and vibration based surface defect analysis | International Conference on vibration problem. | International | - | 2017-18 |
37. | R.G.Desavale | Numerical analysis of acoustic attenuation and performance characteristics of diesel engine muffler. | International Conference on vibration problem. | International | - | 2017-18 |
38. | Dr. R. G. Desavale | Development of al5083 composite matrix used in ship structure | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 531-536 | 2017-18 |
39. | S.N.Jalwadi | Investigation of bending behavior of (carbon/epoxy) composite material using fea | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 467-470 | 2017-18 |
40. | S.N.Jalwadi | Implementation of modified virtual internal bond method to investigate fracture simulations in brittle materials. | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 475-480 | 2017-18 |
41. | S.N.Jalwadi | Systematic efficiency improvement by optimizing the assembly line using witness simulation software | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 490-496 | 2017-18 |
42. | S.N.Jalwadi | Facture simulation Quasi brittle material using virtual internal bond model | India Conference on applied mechanics (INCAM) | National | - | 2017-18 |
43. | Dr. A. P. Shah | Enhancement of Heating Surface Area In Steam Boiler: A Review | 1st National Conference on 'Recent Innovations in Mechanical Engineering' NCRIME-2018 | National | 44-47 | 2017-18 |
44. | Dr. A. P. Shah | Effect of Fuel Injection System on Smoke Emission for two Cylinder Genset Engine’ | 4th National Conference for Post Graduate Students (RIT NCon PG-18) | National | - | 2017-18 |
45. | Dr A. P. Shah | Effect of piston bowl geometry on smoke emission for two cylinder genset engine | 2nd International Conference on new frontiers Engineering science, management and humanities | International | 60-66 | 2017-18 |
46. | Dr.A. P. Shah | Numerical analysis of drag on blunt bodies with the use of different conical spikes at supersonic speed | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 389-394 | 2017-18 |
47. | Dr. A. P. Shah | Numerical analysis on thermal energy storage tank filled with phase change material | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 395-398 | 2017-18 |
48. | S.V Kadam | Numerical simulation of heat transfer enhancement of mgo/water nanofluids in automotive radiator | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 429-432 | 2017-18 |
49. | S.V Kadam | Numerical analysis of air flow in room with different position of inlet and outlet vent. | 11th International Conference on recent innovation in science Engineering and management. | International | - | 2017-8 |
50. | S.B. Kumbhar | Fabrication & evaluation of mechanical properties of banana glass epoxy reinforced composite | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 536-541 | 2017-18 |
51. | S.B. Kumbhar | Design, Fabrication And Experimentation For Glass Fiber Reinforced Composite Torsion Bar. | Recent Trends in Mechanical Engineering. | National | 1-5 | 2017-18 |
52. | C.A.Waghmare | Improvement of quality and yield of miniature circuit breakers by six sigma | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 557 | 2017-18 |
53. | C.A.Waghmare | Design and fabrication of semiautomatic gravity die-casting machine | International Conference on recent innovation in science Engineering and management. | International | - | 2017-18 |
54. | M.L.Deshpande, P.A.Patil | Supply Chain Performance measurement: A literature review | 4th International Conference on Industrial Engineering | International | 277 | 2017-18 |
55. | M. M. Mirza | Analytical and numerical analysis of vibration isolator for hermetically sealed compressor | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 542-546 | 2017-18 |
56. | M. M. Mirza | Vibration measurement of flexible narrow tube under acoustic excitation | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 552-556 | 2017-18 |
57. | S. R. Patil | Optimization in the aspect of crash triggers pattern under axial and oblique impact loading | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 526-531 | 2017-18 |
58. | A.M.Mulla | Optimization of process parameters in EDM | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 569 | 2017-18 |
59. | A.M.Mulla | Analysis of response variables in wedm of nimonic c-263 using taguchi technique | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 579 | 2017-18 |
60. | U. M. Nimbalkar | Finite element analysis of crankcase | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 458-461 | 2017-18 |
61. | U. M. Nimbalkar | Design and modeling of rail transfer trolley | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 462-468 | 2017-18 |
62. | U. M. Nimbalkar | Identification of shrinkage due to modulus of flywheel casting by using procast software | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 471-474 | 2017-18 |
63. | S.B. Khot | Redesign and analysis of gating system of b515 ford drum | Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) | National | 481-484 | 2017-18 |
64. | P S Jadhav, S.B.Khot | A novel approach toward first year engineering workshop practice course with combination of project and product based learning for improved and joyful learning. | Global Journal of Engineering Science and Research Management | International | 85-92 | 2017-18 |
65. | S S Shirgupikar | Multi Objective Optimization of Process Parameters of Dry EDM using Grey Relational Analysis | 4th International Conference on Industrial Engineering | International | - | 2017-18 |
Year 2016-17
Publication in H-Index journal
Sr. No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ ISBN No. |
1. | Dr S K Patil | A Fuzzy ANP based approach for selection of knowledge management strategy to build resilient supply chain: an empirical case study | International Journal of Integrated Supply Management | 10 | 2 | - | 2016-17 | 17 | - | - | - |
2. | S V Kadam | Numerical and Experimental Analysis of MgO Nanoparticles Suspension in Water on Convective Heat Transfer | Materials today proceeding | 5 | 2- | - | 2016-17 | 11 | -- | - | - |
3. | S. S.Shirgupikar | Synthesis-characterization-of-silver-doped-hydroxyapatite-nanoparticles-for-biomedical-applications | Der Pharma chemica | 9 | 3 | 78-84 | 2016-17 | 22 | -- | - | - |
4. | S. S.Shirgupikar | Enhanced Hemolytic Biocompatibility of Hydroxyapatite by Chromium (Cr3+) Doping in Hydroxyapatite Nanoparticles Synthesized by Solution Combustion Method | Journal of Korean ceramic society | 54 | 2 | 158-166 | 20116-17 | 12 | -- | - | - |
5. | S. S.Shirgupikar | Development of Thin Film Coating of CNT for Tools Used in EDM Processes | Materials today proceeding | 5 | 2 | 53 | 2016-17 | 11 | - | - | |
6. | Dr. R. G. Desavale | Damage Detection of roller Bearing System using Experimental Data | Procedia Engineering | 144 | - | 202-207 | 2016-2017 | 40 | - | - | ISSN 1877-7058 |
7. | Dr. R. G. Desavale | Detection of Damage of Rotor-Bearing Systems using Experimental Data Analysis | Procedia Engineering | 144 | - | 195-201 | 2016-2017 | 40 | - | 02 | ISSN 1877-7058 |
Publication in international Journal
Sr. No. | Authors name | Paper title | Journal name | Volume no. | Issue no. if any | Page nos. | Year and month of publication | H-index | SCI Impact factor | Non SCI Impact factor if any | ISSN/ISBN No. | |
1. | Dr. S.K Patil | Evaluating the impact of Knowledge Management adoption on Supply Chain performance by BSC-FANP approach: An empirical case study. | (Applied Management Studies) | 14 | 52-74 | 20116-17 | - | - | - | ISSN: 1645-9911 | ||
2. | Dr. S.K Patil | Analysis of Learning Styles of Engineering Students for Improving Engineering Education | Journal of Engineering Education & Transformation (JEET-17) | 30 | - | - | 2016-17 | - | - | - | ||
3. | Dr M T Telsang | Impact of IUCEE IGIP Engineering Educator's Certification Program on Teaching Performance of Participants | Journal of Engineering Education & Transformation | 30 | - | - | 2016-17 | - | - | - | ISSN:2349-2473 | |
4. | Dr S M Sawant | Investigation of Emission in Inline Diesel Engine Combustion Using ECFM-3Z Model | International Engineering Research Journal(IERJ) | - | - | 90-93 | 20116-17 | - | - | - | ISSN:2395-1621 | |
5. | .Dr S M Sawant | Thermal Performance Analysis of High Altitude Engine Radiator | International Engineering Research Journal(IERJ) | - | - | 63-68 | 20116-17 | - | - | - | ISSN:2395-1621 | |
6. | S.S. Gawade | Internal Combustion Engine Vibrations And Vibration Isolation. | International Journal of Scientific & Engineering Research. | 08 | 04 | 243-250 | 2016-17 | - | - | - | ISSN:2229-5518 | |
7. | M.B.Mandale | Torsional Dynamic Stiffness of Flexible Coupling by Analytical and Simulation Method. | International l of Engineering Research Journal | - | - | 121-123 | 2016-17 | - | - | - | ISSN: 2395-1621 | - |
8. | .M.V.Kavade | Design of gears for drilling machine. | International journal of scientific and engineering research | 8 | 4 | 727-735 | 20116-17 | - | - | - | ISSN: 2349-2473 | |
9. | M.V.Kavade | Delamination detection in Composite Sandwich Beam: Experimental study | Journal of Advances in Science and Technology | - | -- | - | 2016-17 | - | - | - | - | |
10. | .M.V.Kavade | Design of crankshaft of micro alloy steel by using MATLAB for fatigue failure | Journal of Advances in science and technology | - | - | - | 2016-17 | - | - | - | ISSN: 2229-5518 | |
11. | M.V.Kavade, S. B. Khot | Impact of IUCEE IGIP Engineering Educator's Certification program on Teaching performance of participants. | Journal of Engineering Education Transformations (JEET) | 30 | . | 2016-17 | - | - | - | ISSN: 2278-0181 | ||
12. | N.K. Chapkhane | Determination of Impact Force for Turbine Housing Containment.� | International Journal of Engineering Research & Technology (IJERT) | 5 | 5 | 612-618 | 20116-17 | - | - | - | ISSN:2348 -3121 | |
13. | .N.K. Chapkhane | Design and analysis of subsoiler. | international journal of modern tread in engineering science | 4 | 01 | 11-17 | 20116-17 | - | - | - | ISSN: 2349-2473 | |
14. | .N.K. Chapkhane | Development of Wheel Profile from Flute Profile | International Journal of machines. Material& manufacturing Engineering. | - | - | 2016-17 | - | - | - | - | ||
15. | N.K. Chapkhane M.M Mirza | Progressive Failure Analysis of Composite Plate using FEA | International l of Engineering Research Journal | - | - | 1-7 | 2016-17 | - | - | - | ISSN: 2395-1621 | |
16. | S.N. Jalwadi | Development and Implementation of guideline for Die casting process in DFM Pro software | International Journal of scientific and engineering research | 8 | 4 | 359-365 | 20116-17 | - | - | - | ISSN 2229-5518 | |
17. | S.N.Jalwadi | Optimization and Development of aluminum gear box for welding head of SAW machine. | International l of Engineering Research Journal | - | - | 136-138 | 2016-17 | - | - | - | ISSN: 2395-1621 | |
18. | S V Kadam | Development of Numerical Model for Cooling System of 10 MeV LINAC using ANSYS Fluent | IJSED International Journal for Scientific Research & Development | 5 | 4 | 1-3 | 2016-17 | |||||
19. | M.M Mirza | Effect of changing of spur gear tooth parameter on bending stress by simulation | international research journal of engineering & technology | 4 | 4 | 23-27 | 20116-17 | 5.181 | ISSN: 2395-0056 | |||
20. | A.M Mulla | CFD analysis of maglev train for high speed corridor project | International Journal of Scientific Engineering Research. | 8 | 4 | 212 | 20116-17 | - | - | - | ISSN: 2230-9659 | |
21. | U.M Nimbalakar | Review on Manufacturing Predictive Simulation: Use of WITNESS Simulation Software | International Journal of Scientific and Engineering Research. | 8 | 4 | 355 | 20116-17 | - | - | - | e-ISSN(O):2348-4470 p-ISSN (P): 2348-6406 |
|
22. | P M Jadhav | A holistic approach for teaching data structure course in the department of IT | Journal of Engineering Education & Transformation | -- | - | - | 2016-17 | - | - | - | ISSN: 2349-2473 | |
23. | P M Jadhav , P S Jadhav, A.M Mulla | Blending ICT with project based learning for effective teaching and learning of Mechatronics. | Journal of Engineering Education & Transformation | 30 | - | - | 2016-17 | - | - | - | ISSN: 2349-2473 | |
24. | P S Jadhav | Analysis of Heat Transfer coefficient in Heat Pipe | Journal of Advances in Science & Technology | 13 | 1 | 46 | 2016-17 | - | - | - | ISSN: 23933031 | |
25. | P S Jadhav | Reduction of west by applying lean manufacturing toll for assembly line layout | Journal of Advances in Science & Technology | 4 | 1 | 1-7 | 2016-17 | - | - | - | ISSN: 2393-3021 | |
26. | L R Patil | Rotor dynamic Analysis of Bolted Disk-Drum Rotor with Contact Nonlinearity | International journal of scientific and technical research in engineering | 1 | 3 | 1 | 20116-17 | - | - | - | ||
27. | R.V Zende | A comparative study of cutting forces with Ti–6Al–4V and Inconel 718 using coated carbide tool with dry and wet high speed machining |
International Journal of Advance Engineering andResearch Development |
- | - | 20116-17 | - | - | - | e-ISSN:2395-0056,p-ISSN:2395-0072 | ||
28. | A.B Chougule | Adaptive Front Luminous System Of Roadster on a way using Arduino. | International Journal of Research in engineering and technology. | 5 | 7 | 314 | 20116-17 | - | - | - | E-ISSNs: 2319-1163. |
Publication in Conference Paper
Sr. No. | Authors name | Paper title | Conference Name | International/National | Page nos. If any | Year and month of publication |
1. | Dr. S. K. Patil | Ranking the Enablers of Knowledge Management adoption in Supply Chain by using Trapezoidal fuzzy AHP Method) | International Conference on Best Practices in Supply Chain Management to be held at College of engineering, Trivandrum from 22nd December to 23rd December 2016. | International | - | 2016-17 |
2. | Dr. S. K. Patil | Progress and Development of Silicon Based Ceramic Matrix Composite Brake Material for Military Aircraft's - A Preliminary Study | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 4-9 | 2016-17 |
3. | Dr. S. K. Patil | Teaching-Learning based optimization algorithm. | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 9-15 | 2016-17 |
4. | S. K. Patil | Intelligent Manufacturing System (IMS) for Design Unconstrained layout. | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 15 | 2016-17 |
5. | .Dr. S. K. Patil | Bobbin tool friction stir welding and knowledge based design review | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale. | International | 16 | 2016-17 |
6. | Dr. S. K. Patil | ADACOR architecture in Holonic Manufacturing System at shop floor level | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 16 | 2016-17 |
7. | Dr. S. K. Patil | Implementation of Lean Manufacturing Technique for Milk Processing Industries | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 17 | 2016-17 |
8. | Dr. S. K. Patil | Applications of genetic algorithm | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 18 | 2016-17 |
9. | Dr. S. K. Patil | Pipe Material Selection in Sugar Industry by Using fuzzy TOPSIS Method | International Conference on Modern Era Research in Mechanical Engineering held during 29-30th September, organized by Mechanical Engineering Department RIT Sakharale | International | 33 | 2016-17 |
10. | Dr. S. K. Patil | Application of Value Stream Mapping(VSM):A Case Study of Gear Manufacturing Industry | 3rd RIT-National Conference for Engineering Post Graduates | National | - | 2016-17 |
11. | Dr. S. K. Patil | Analysis of cycle time of assembly line using MTM method: A Case Study of Manufacturing Industry | 3rd RIT-National Conference for Engineering Post Graduates | National | - | 2016-17 |
12. | Dr. M.T. Telsang | Redesign, develop and optimization of mixed-model assembly line using witness software | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 8 | 2016-17 |
13. | Dr. M.T. Telsang | Design and Development of low cost automation system using component, instrument and techniques. | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 31 | 2016-17 |
14. | Dr. M.T. Telsang | Development of Model Customization by using CAD Kernel Open Cascade: A Review | Proceedings of the Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 29 | 2016-17 |
15. | Dr. S M Sawant | Numerical Investigation of Effect of Shield on Thermohydraulic Performance of Plate-pin Fin Heat Sink. | 3rd RIT Post Graduates Conference (RIT PG Con | National | 1-6 | 2016-17 |
16. | Dr. S M Sawant | Numerical And Experimental Investigation of Thermal Behaviour of Cross Flow Heat Exchanger. | 3rd RIT Post Graduates Conference (RIT PG Con | National | - | 2016-17 |
17. | Dr. S M Sawant | Design And Performance Analysis of Air To Air Heat Exchanger For Electrical Control Panel (The cooling system for enclosure of electronic components) | 3rd RIT Post Graduates Conference (RIT PG Con | National | 1 | 2016-17 |
18. | Dr. S.S .Gawade | Development and Simulation of an Integrated (Microwave + Dehumidification) Drying System for Fruit and Vegetables | 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 444 | 2016-17 |
19. | Dr. S.S .Gawade | A Review : Analysis and Characterization of Inflatable Material Structure | 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 458 | 2016-17 |
20. | Dr. S.S .Gawade | Use of smart fluid in anti-vibration mounts | 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 480 | 2016-17 |
21. | Dr. S.S .Gawade | High Yield Strength ER Fluid for Heavy Duty Applications-Methodologies | Modern Era Research in Mechanical Engineering | International | 101 | 2016-17 |
22. | Dr. S.S .Gawade | Alternative Fuels for IC Engines: A Review | Modern Era Research in Mechanical Engineering | International | 133 | 2016-17 |
23. | Dr. S.S .Gawade | Design analysis and optimization of 10�-600# gate valve body | Modern Era Research in Mechanical Engineering | International | 207 | 2016-17 |
24. | Dr. S.S .Gawade | Investigation on Effect of Defect on Deep Groove Ball Bearing by Experimental and FEA Approach | Modern Era Research in Mechanical Engineering | International | 321 | 2016-17 |
25. | Dr. S.S .Gawade | Viable Applications of Electro-Rheological Fluids- A Strategic Review | Modern Era Research in Mechanical Engineering | International | 344 | 2016-17 |
26. | Dr. S.S .Gawade | A Review of Dry Particulate Lubrication of Journal bearing | Modern Era Research in Mechanical Engineering | International | 575 | 2016-17 |
27. | Dr. S.S .Gawade | Design & Prototyping of Magneto rheological Disc Brake for Automotive Application | Modern Era Research in Mechanical Engineering | International | 585 | 2016-17 |
28. | Dr. S.S .Gawade | Journal Bearing Test Rig for Pressure Distribution | Modern Era Research in Mechanical Engineering | International | 592 | 2016-17 |
29. | Dr. S.S .Gawade | Preparation Characterization and performance analysis of BTO Based high yield strength electro rheological fluid in artillery gun recoil system using FEA approach. | IMME17, NIT Trichy | International | 111 | 2016-17 |
30. | Dr. S.S .Gawade | Design and Development of Intake device for bio gas operated 4 stroke SI engine | International conference on current research topic in power, nuclear and fuel energy | International | - | 2016-17 |
31. | Dr. S.S .Gawade | Two way stiffness tuning of MRE- shape memory alloy composite | International conference on material Manufacturing and modeling, (ICMMM) - 2017, VIT Velure. | International | - | 2016-17 |
32. | Dr. S.S .Gawade | Performance Analysis of Different Metallic Diaphragm by using theoretical & FEM | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 265 | 2016-17 |
33. | Dr. S.S .Gawade | Design and Development of Electro-Rheological fluid Machine Toll Mount | International conference on current research topic in power, nuclear and fuel energy | International | 723 | 2016-17 |
34. | Dr. S.S .Gawade | A Review: Exhaust Gas Recirculation Mixer Foe Diesel Engine. | NCRTM | National | 2016-17 | |
35. | Dr. S.S .Gawade | An Experimental Study of Tribological Behavior of Journal and Bearing Material Under Graphite Lubrication | NCRTM | National | 2016-17 | |
36. | M.V. Kavade | Delamination detection in Sandwich structure using frequency response function - Review | Proceedings of the Modern Era Research in Mechanical Engineering - 2016 (MERME-16) | International | - | 2016-17 |
37. | M.V. Kavade | Industrial Internet technology | Proceedings of the Modern Era Research in Mechanical Engineering - 2016 (MERME-16) | International | - | 2016-17 |
38. | M.V. Kavade | Hybrid layered manufacturing: Rapid tooling process | Proceedings of the Modern Era Research in Mechanical Engineering - 2016 (MERME-16) | International | - | 2016-17 |
39. | M.V. Kavade | Design of crankshaft of micro-alloy steel by using MATLAB for fatigue strength | Proceedings of the 3rd RIT post graduate conference (RIT PG Con-17) | International | 410 | 2016-17 |
40. | M.V. Kavade | Customization for 3D CAD of radiator tanks and header plate using Creo software | Proceedings of the third RIT Post Conference (RIT PG Con-17) | International | 404 | 2016-17 |
41. | M.V. Kavade | New production layout design for increasing production rate using SLP method: A case study of fabrication industry | Proceedings of the 3rd RIT post graduate conference (RIT PG Con-17) | International | 577 | 2016-17 |
42. | M.V. Kavade | Numerical simulation of nuclear shock wave propagating through conduit with side branch | Proceedings of the 3rd RIT post graduate conference (RIT PG Con-17) | International | 391 | 2016-17 |
43. | B.R Jadhav | A Case study to improve consultancy in mechanical engineering department. | (IUCEE) Fourth ICTIEE 2017 At Hyderabad, Fourth international conference on transformation in engineering education | International | 82 | 2016-17 |
44. | B.R Jadhav | Genetic algorithm approach for optimization of CNC turning | MERME-16 Paper ID-122,International conference on modern era research in mechanical engineering-2016 | International | 56 | 2016-17 |
45. | B.R Jadhav | Ultrasonic vibration assisted friction stir welding | MERME-16 Paper ID-129,International conference on modern era research in mechanical engineering-2016 | International | 56 | 2016-17 |
46. | B.R Jadhav | Effect of submerged arc welding process parameters on IS-2062Grade-B Steel Paper ID-PE1 | RIT PGCON 2017 Paper ID-PE 1,Proceedings of the 3rd RIT Post graduates conference | International | 547 | 2016-17 |
47. | B.R Jadhav | Waste heat recovery system in metal casting | MERME-16 Paper ID-126,International conference on modern era research in mechanical engineering-2016 | International | 49 | 2016-17 |
48. | B.R Jadhav | Effect of post heat treatment on aluminum alloy | MERME-16 Paper ID-21,International conference on modern era research in mechanical engineering-2016 | International | - | 2016-17 |
49. | N .K. Chhapkhane | Correlating Kano’s model with phases in Product Re-Design and Development. | Proceedings of the 2nd National Conference for Engineering Post Graduate Students, RIT NConPG-16 | National | - | 2016-17 |
50. | N .K. Chhapkhane | API BB2 Pump casing design and verification using fem | NCMMME-2016. | National | - | 2016-17 |
51. | N .K. Chhapkhane | Design & Development of Automatic Sorting Machine Cooked & Dried Turmeric Rhizomes | International | 01 | 2016-17 | |
52. | .N .K. Chhapkhane | Stress Analysis of High Pressure Casting Cylinder for Reciprocating Compressor. | Proceeding of the 3rd National Conference for Engineering Post Graduate students RIT NCon. PG-17 | National | 2016-17 | |
53. | S.N. Jalwadi | Stress concentration studies for crack propagation analysis of spur gear using ABAQUS | 3rd RIT Post Graduate Conference (RIT con-17) | National | 379 | 2016-17 |
54. | S.N. Jalwadi | Investigating fracture behavior in brittle material by using virtual internal bond model | 3rd RIT Post Graduate Conference (RIT con-17) | National | 394 | 2016-17 |
55. | S.N. Jalwadi | Fracture parameters evaluation in nanomaterials using VIB model | 3rd RIT Post Graduate Conference (RIT con-17) | National | 417 | 2016-17 |
56. | S.N. Jalwadi | Optimization and development of aluminum gear box for welding head of SAW machine | International conference on Innovations and Recent trends in engineering (ICIRTE-2017)) | International | - | 2016-17 |
57. | S. D Patil | Design and analysis of compact metal hydride reactor for hydrogen storage | International conference on Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 54 | 2016-17 |
58. | S. D Patil | Numerical Analysis of Multi-Corrugated Tube Metal Hydride Based Hydrogen Storage System | International conference on Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 313 | 2016-17 |
59. | S. D Patil | Aerodynamic study of Flow over a Sphere | RIT Post Graduate Conference for engineering students 2017 | National | 509 | 2016-17 |
60. | S. D Patil | Optimization of pipe for pressure drop using Design of Experiment | RIT Post Graduate Conference for engineering students 2017 | National | 513 | 2016-17 |
61. | S. D Patil | Design Space Analysis and Parameter based Optimization of Downpipe by Response Surface Method | RIT Post Graduate Conference for engineering students 2017 | National | 517 | 2016-17 |
62. | S. D Patil | Numerical Analysis of Mini-channel Metal Hydride Reactor for Hydrogen Storage | RIT Post Graduate Conference for engineering students 2017 | National | 533 | 2016-17 |
63. | S. D Patil | Numerical study of fluid flow and heat transfer in micro channel heat sink | RIT Post Graduate Conference for engineering students 2017 | National | 542 | 2016-17 |
64. | S. D Patil | A Case Study to Improve Consultancy in Mechanical Engineering Department | Fourth International conference on transformation in Engineering Education | International | 82 | 2016-17 |
65. | Dr. S. D Patil | Numerical Investigation of Design mono hull under extreme irregular sea conditions using Boundary Element Method and Strip theory. | International Conference on Emerging Technogiical Innovations in Mechanical Engineering. | International | 1-6 | 2016-17 |
66. | R.G. Desavale | Experimental mathematical model for diagnosis of vibration generated in defective rolling element bearing | ISME2017 | International | 1-5 | 2016-17 |
67. | R.G. Desavale | Dynamic modeling of taper roller bearing with surface defect using matrix method. | ISME2017 | International | 1 | 2016-17 |
68. | M. B Mandale | Vibration Analysis of an Automobile Exhaust Muffler | 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 438 | 2016-17 |
69. | Mandale M. B | Study of Structural Stability, Micro phonics and Sensitivity to Helium Pressure for Spoke Resonator | 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 463 | 2016-17 |
70. | M. B Mandale | Design and analysis of CHAMP T 400 Welding machine. | 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 475 | 2016-17 |
71. | M. B Mandale | Thermal Management of Electronic Packaging -A Review | MERME-2016 | International | 559 | 2016-17 |
72. | M. B Mandale | Disc Brake Squeal-A Review | MERME-2016 | International | 12 | 2016-17 |
73. | M. B Mandale | Torsion dynamic stiffness of flexible coupling by analytical and simulation method | ICIRTE-2017 at AGCE, Satara | National | - | 2016-17 |
74. | . M. B Mandale | condition monitoring of centrifugal pump-brief study | MERME-16 | International | 602 | 2016-17 |
75. | M. V Pisal | Review of dehydration& Dryer generation | MERME-2016. RIT | International | - | 2016-17 |
76. | M. V Pisal | Experimental Investigation of dehydration of Jaggery. | RIT PG CON | National | - | 2016-17 |
77. | . M. V Pisal | Multiaxis machining centers | MERME16 | International | - | 2016-17 |
78. | M. V Pisal | Belt finishing Processes | MERME-2016. RIT | International | - | 2016-17 |
79. | S. V. Kadam | CFD analysis of led cooling setup with nanofluids | Proceedings of the Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | - | 2016-17 |
80. | S. V. Kadam | Numerical heat transfer analysis of flowing fluid through a circular tube with helical twisted strip inserts | 1st National Conference on Mechanical Engineering in Next Decade (NC-MEND2017), March 10-11, 2017 at Government College of Engineering., Karad, Maharashtra, INDIA. | National | - | 2016-17 |
81. | S. V. Kadam | Numerical simulations of plate fin oil cooled heat exchanger | PG Ncon 2017 | National | - | 2016-17 |
82. | S. V. Kadam | Numerical Investigation of Convective Heat Transfer Enhancement by using CuO Nanoparticles. | PG Ncon 2017 | National | - | 2016-17 |
83. | S. V. Kadam | Numerical and Experimental Analysis of MgO Nanoparticles Suspension in Water on Convective Heat Transfer | ICAMMAS17 | International | - | 2016-17 |
84. | S. V. Kadam | Heat Transfer characteristic of helical coil by using CFD | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | - | 2016-17 |
85. | Dr.A.P.Shah | Preparation and Characterization of Biodiesel Extracted from Acidic Oil: a By –product of Soybean oil Refining Process. | International Conference on Emerging Technogiical Innovations in Mechanical Engineering. | International | 1-5 | 2016-17 |
86. | Dr.A.P.Shah | Computational Modelling for High Thermal Conductivity Heat Pipe Thermal Ground Planes | Int. Conference on Modern Era Research in Mechanical Engineering –MERME-2016 | International | 1-5 | 2016-17 |
87. | Dr.A.P.Shah | Mathematical modeling & design of worm and worm gear pair for determining the surface stress acting on the tooth of worm and worm gear for plug Valve application | 5th National Conference on “Innovations in Mechanical Engineering | National | - | 2016-17 |
88. | Dr.A.P.Shah | Learning Centric Approach through Various Class Room Activities for Better Learning | National Conference on Innovations in Engineering and Management Education | National | - | 2016-17 |
89. | C.A Waghmare | Experimental analysis of residual stresses developed in metal inert gas welding of aisi 202 stainless steel | RIT N Con PG-17 | National | 594 | 2016-17 |
90. | C.A Waghmare | Effect of rake angle and cutting speed on cutting force, tool life and tool vibration of aisi 1020 steel on CNC turning by using single point cutting tool | RIT N Con PG-17 | National | 589 | 2016-17 |
91. | C.A Waghmare | Process characterization of fiber laser-mig hybrid welding (lmhw) of al alloy | MERME 2016 | International | 49 | 2016-17 |
92. | C.A Waghmare | changeable manufacturing system | MERME 2016 | International | 47 | 2016-17 |
93. | S.R Patil | Experimental study on wear of WC GT10 and OHNS 01 using ANOVA | International Conference on Modern Era Research in Mechanical Engineering 2016 | International | - | 2016-17 |
94. | S.R Patil | Application of Taguchi technique and ANOVA to experimental study of tribological behavior of materials pairs with case study | National Tribology Conference 2016 NTC2016 IIT BHU Varanasi | International | 79-80 | 2016-17 |
95. | S.R Patil | Wear prediction of titanium nitrate coated 17-4 Ph SS by artificial neural network model | Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | - | 2016-17 |
96. | . S.R Patil | Synthesis of BaTiO3 nanoparticles: its characterization, modification and application to Electrorheology. | Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | - | 2016-17 |
97. | S.R Patil | Incorporation of Smart fluids in Dampers for Artillery Gun Recoil System. | Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | 385 | 2016-17 |
98. | S.R Patil | A Study on Alternate Materials for Brake Pads | Proceedings of the 3rd RIT Post Graduates Conference (RIT PG Con-17) | National | - | 2016-17 |
99. | S.R Patil | Design & Prototyping of Magneto rheological Disc Brake for Automotive Application | MERME-2016 | International | 585 | 2016-17 |
100. | S.R Patil | Posture Evaluation by Rula and Introduction to Pugh Matrix Technique. | NCRTM | National | 585 | 2016-17 |
101. | M.M Mirza | Experimental Stress Analysis of two wheeler connecting rod using photo elasticity | IJARIIE | International | 1141 | 2016-17 |
102. | M.M Mirza | Design & Analysis of water cooled submersible motor bearing using CFD and FSI | RIT NCOM PG-16 | National | - | 2016-17 |
103. | M.M Mirza | Design &testing of magnetically levitated vertical axis wind turbine (VAWT) | MERME-2016. RIT | International | 88 | 2016-17 |
104. | M.M Mirza | A case study to improve consultancy in mechanical engineering department | ICTIEE-2017 Hyderabad | International | 82 | 2016-17 |
105. | M.M Mirza | Design & development of multi-tasking MIG welding robot | MERME-2016. RIT | International | 331 | 2016-17 |
106. | M.M Mirza | Design & analysis of MRJ-T Cry cooler. | MERME-2016. RIT | International | 435 | 2016-17 |
107. | M.M Mirza | Sizing of A three phase separator for well head fluid in gas &oil industry | RIT NCOM PG-17 | National | 449 | 2016-17 |
108. | M.M Mirza | Component design of hydraulic jack for sugar mill setting | RIT NCOM PG-17 | National | 454 | 2016-17 |
109. | A.M Mulla | Application of Analytical Hierarchy Process (AHP) :A Case Study of Warehouse Storage Selection | RIT PGCON-2017 | National | - | 2016-17 |
110. | A.M Mulla | A study of Electrolytic in process dressing(ELID) grinding | MERME 2016 | International | - | 2016-17 |
111. | A.M Mulla | Review on Micro-Forming and various process parameters affecting Micro-Forming. | MERME2016 | International | 521 | 2016-17 |
112. | A.M Mulla | Static and Dynamic analysis of Launcher system | RIT PGCON-2017 | National | 399 | 2016-17 |
113. | A.M Mulla | Launcher Vehicle under different load cases. | International | - | 2016-17 | |
114. | U. M Nimbalakar | CAD Customization of Pressure Vessel using CATIA | Proceedings of the Digitalization: An Impact on Indian Society INCONRIT 2017 | National | - | 2016-17 |
115. | . U. M Nimbalakar | Parametric Modeling of Pressure Vessel using CATIA Software | Proceedings of the 3rd RIT Post Graduate Conference (RIT PG Con-17) | National | 423 | 2016-17 |
116. | U. M Nimbalakar | Manufacturing Predictive Simulation: Use of WITNESS Simulation Software | Proceedings of the Digitalization: An Impact on Indian Society (INCNRIT 2017) | National | - | 2016-17 |
117. | U. M Nimbalakar | Parametric Modeling and Analysis to Optimizes size and location of openings in pressure vessel: a review | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | National | 475 | 2016-17 |
118. | U. M Nimbalakar | A Review on Integration Techniques of CAD/CAM/CAE | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 468-474 | 2016-17 |
119. | P. S.Jadhav | Lean Design of Assembly Line for Promoting Continuous Improvement | National Conference on Design, Manufacturing, Energy & Thermal Engineering at DACOE Karad | National | 12 | 2016-17 |
120. | G.L Surywanshi | Design and Development of Side Stand Re-tractor System for bikes | MERME-16(RIT) | International | 297 | 2016-17 |
121. | S S Shirgupikar | Development of Thin Film Coating of CNT for Tools Used in EDM Processes | IMME17/Elsevier | International | 2016-17 | |
122. | S S Shirgupikar | Experimental Investigation of Dry Electric Discharge Machining (Dry EDM) Process on Bright Mild Steel | IMME17/Elsevier | International | 2016-17 | |
123. | R.A Magdum | Design of 4-Reduction 3-Speed Gear Box | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 22 | 2016-17 |
124. | R.V Pawar | Design and analysis of Hybrid Composite double lap Riveted joint for tension. | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 26 | 2016-17 |
125. | R.V Zende | Diameter and roundness measurement Using | Modern Era Research in Mechanical Engineering-2016 (MERME-16) | International | 2016-17 | |
126. | . A.B Chougule | Adaptive Front Luminous System Of Roadster on a way using Arduino. | IMME17/Elsevier | International | 2016-17 | |
127. | A.B Chougule | Pusher configured turboprop engine oil cooler ejector performance: CFD analysis and Validation | FMFP-2016 | International | 1 | 2016-17 |
128. | A.B Chougule | Water Heating System using Compound Parabolic Collector with Convex lenses | PNFE-2016 | International | - | 2016-17 |
129. | A.B Chougule | Enhancement of hardness property of AA2219 by varying TiO2 percentage as a Reinforcement | IMME17/Elsevier | International | - | 2016-17 |