Teaching Experience: 07 Years 

2016

Assistant Professor at RIT, Rajaramnagar

2014-2016

Assistant Professor at ADCET, Ashta 

2013-2014

Assistant Professor at PVPIT, Budhgoan

• Industrial Engineering and Management 
• Non – Conventional Manufacturing Processes 
• Micro-Machining 
• Design of Experiment and Optimization 
• Material Science, Bio-composites

A) Publications (in International Journals)

• Dong, P. V., Patil, S. R., Shirguppikar, S. S., Tu, D. N., Phan, N. H., Thanh, L. T. P., & Vu, N. N. (2022). Synthesize and characterization of artificial human bone developed by using nanocomposite. EUREKA: Physics and Engineering, (3), 112-120. https://doi.org/10.21303/2461-4262.2022.002432
• Phan, Nguyen Huu, Patil, Santosh R., Gawade, Sanjaykumar, Shirguppikar, Shailesh S., Ly, Nguyen Trong, Tam, Nguyen Chi and Thanh, Le Thi Phuong. "Design of ER damper for recoil length minimization: A case study on gun recoil system" Journal of the Mechanical Behavior of Materials, vol. 31, no. 1, 2022, pp. 177-185. https://doi.org/10.1515/jmbm-2022-0017
• Phan, N.H., Shirguppikar, S., Long, B.T., Bich, M.T., Dung, L.Q. (2022). Experimental Investigation of the Influence of Processes Parameters on Z Coordinate in Micro EDM for Ti-6Al-4V. In: Long, B.T., Kim, H.S., Ishizaki, K., Toan, N.D., Parinov, I.A., Kim, YH. (eds) Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021). AMAS 2021. Lecture Notes in Mechanical Engineering. Springer, Cham.https://doi.org/10.1007/978-3-030-99666-6_73
• Nguyen, HP., Banh, TL., Shirguppikar, S.S., Patil, M.S., Mac, TB., Le, QD. (2022). Performance Analysis of Copper Coated Aluminum Tool in Electrode Discharge Machining of Ti-6Al-4V Alloy. In: Long, B.T., Kim, H.S., Ishizaki, K., Toan, N.D., Parinov, I.A., Kim, YH. (eds) Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021). AMAS 2021. Lecture Notes in Mechanical Engineering. Springer, Cham.https://doi.org/10.1007/978-3-030-99666-6_75
• Shirguppikar Shailesh S. and others , “Assesing the effects of Uncoated and Coated Electrode on Response Variables in Electrical Discharge Machining for Ti-6Al-4V Titanium Alloy”, Tribology in Industry, 2021, Tribology in Industry; Kragujevac Vol. 43, Iss. 4, (2021): 524-534.DOI:10.24874/ti.1020.12.20.03
• Phan, N.H., Van Dong, P., Dung, H.T. et al. Multi-object optimization of EDM by Taguchi-DEAR method using AlCrNi coated electrode. Int J Adv Manuf Technol 116, 1429–1435 (2021).
  https://doi.org/10.1007/s00170-021-07032-3
• Shirguppikar, Shailesh S., and Maharudra S. Patil. "Experimental investigation on micro-electro discharge machining process using tungsten carbide and titanium nitride-coated micro-tool electrode for machining of Ti-6Al-4V." Advances in Materials and Processing Technologies (2020): 1-18. Publisher: Taylor & Francis
• Shirguppikar, Shailesh, and Maharudra Patil. "Performance Analysis of Multi Wall Carbon Nanotubes (MWCNT) Coated Tool Electrode During Machining of Titanium Alloy (Ti6Al4V)." In International Manufacturing Science and Engineering Conference, vol. 84263, p. V002T06A017. American Society of Mechanical Engineers, 2020.Publisher: ASME
• Phan, Nguyen Huu, Vu Ngoc Pi, Nguyen Quoc Tuan, Shailesh Shirguppikar, M. S. Patil, Mohsen Asghari Ilani, Le Xuan Hung, T. Muthuramalingam, and Tran Quoc Hung. "Tool wear rate analysis of uncoated and AlCrNi coated aluminum electrode in EDM for Ti-6Al-4 V titanium alloy." In International Conference on Engineering Research and Applications, pp. 832-838. Springer, Cham, 2020. Publisher: Springer Cham
• Phan, Nguyen Huu, Vu Ngoc Pi, Shailesh Shirguppikar, M. S. Patil, Mohsen Asghari Ilani, Le Xuan Hung, T. Muthuramalingam, and Tran Quoc Hung. "Material removal rate in electric discharge machining with aluminum tool electrode for Ti-6Al-4V titanium alloy." In International Conference on Engineering Research and Applications, pp. 527-533. Springer, Cham, 2020.
  Publisher: Springer Cham
• Tangade, H. S., S. N. Pusawale, and S. S. Shirguppikar. "Synthesis and characterization of ZnO thin films deposited by chemical route." Materials Today: Proceedings 33 (2020): 5147-5149.Publisher: Elsevier
• Shirguppikar, S. S., M. S. Patil, and Vinayak Ghorapade. "Grey fuzzy multiobjective optimization of process parameters for dry electro discharge machining process." Materials Today: Proceedings 27 (2020): 671-676.Publisher: Elsevier
• Jadhav, Baliram Rajaram, M. S. Sohani, and Shailesh Shirguppikar. "Performance Investigation of Powder Mixed Electro Discharge Machining of Hypoeutectic Al-Si Alloy Using Brass Electrode." International Journal of Materials Forming and Machining Processes (IJMFMP) 6, no. 2 (2019): 31-43.Publisher: IGI Global
• Shirguppikar, Shailesh S., and Uday A. Dabade. "Experimental investigation of dry electric discharge machining (Dry EDM) process on bright mild steel." Materials Today: Proceedings 5, no. 2 (2018): 7595-7603.Publisher: Elsevier
• Kolekar, Tanaji V., Sneha S. Bandgar, Hemraj M. Yadav, Shailesh S. Shirguppikar, Mahesh A. Shinde, and Veeresh T. Magalad. "Studies on Cancer Cell Cytotoxicity, Antimicrobial Activity of Sol-Gel Synthesized Willemite for Biomedical Applications." Current Nanoscience 13, no. 5 (2017): 469-475.
• Bandgar, S. S., T. V. Kolekar, Sh S. Shirguppikar, M. A. Shinde, R. V. Shejawal, and S. R. Bamane. "Synthesis, characterization of silver doped hydroxyapatite nanoparticles for biomedical applications." Der Pharma Chemica 9, no. 3 (2017): 78-84.
• Bandgar, Sneha S., Hemraj M. Yadav, Shailesh S. Shirguppikar, Mahesh A. Shinde, Rajendra V. Shejawal, Tanaji V. Kolekar, and Sambhaji R. Bamane. "Enhanced hemolytic biocompatibility of hydroxyapatite by chromium (Cr 3+) doping in hydroxyapatite nanoparticles synthesized by solution combustion method." Journal of the Korean Ceramic Society 54, no. 2 (2017): 158-166.

B) Publications (in Indian Journals)

Nil

C) Publications (in peer-reviewed conferences held abroad)

Nil

D) Publications /Presentation(in peer-reviewed conferences held in India)

• S. S. Shirguppikar ., " Cryogenic Treatment of Nimonic Alloy-Hard Turning: State-of-the-art, Challenges and Future Directions", Materials Today: Proceeding, Vol 18,  4120-4132, 2019.
• S. S. Shirguppikar ., " A Comparative Performance Study of Dry and Near Dry EDM Processes in Machining of Spring Steel Material ", Materials Today: Proceeding, Vol 18,  5247-5257 , 2019.
• Shirguppikar S. S. , Telsang M. T., Kadam A. K. ,2017, “Multi Objective Optimization of Process parameters of Dry EDM Using Grey Relational Analysis”, ICCIE, Proceedings, pp.568-576.
• Shirguppikar,S.S., Dabade, U. A., 2017, “Experimental Investigation of Dry Electric Discharge Machining (Dry EDM) Process on Bright Mild Steel”, Elsevier, Materials today, Proceedings, 10, pp.1-11.
• Shirguppikar, S. S., Patil M. S.,Kolekar, T. V., Jadhav P. S. and Chougule, A. B., 2017,    “Development of Thin Film Coating of CNT for Tools Used in EDM Processes,” Elsevier,  Materials today, Proceedings, pp.1-9.

E) National Conference

• Shirguppikar S. S., Patil L. R., Kadam A. K., 2018, ”Design of Rocker Bogie Mechanism of Planetary Rover for Stability on Uneven Terrain”, NCRTME-2018, Proceedings,

F) International Conference

Nil

G) Book

i) Books Published

• Text Book of Metallurgy, 2015

ii) Chapters in Book

Nil

H) Patents

i) Patents(Filed)

• Thin film metal & carbon coated microelectrode for electric discharge machining process. Application No: 201821039754A

• Lifetime ISTE Member

• Experimental Investigation of coated electrode for Electro Discharge Machining Process  
• Effect coating electrode in machining of micro electro discharge machining process on Titanium Grade 5.